Solton HD 181 Sub

Solton HD 181 Sub is a single ground-stackable 18-inch direct-radiating subwoofer, built as the low-frequency section for the HD series and other Solton mid-high cabinets in mobile and installed applications. A long-excursion driver with a 4-inch voice coil handles 800 W continuous and 3200 W peak power, reaching a maximum peak SPL of 135 dB at one meter. A compact bass-reflex enclosure made of 15 mm birch plywood keeps the cabinet manageable despite its solid low-end output.

Bass Foundation for HD Series Systems

An integrated M20 pole socket lets a distance pole with an HD 151, HD 101, or HD 88 cabinet mount directly on top of the subwoofer, building a complete portable point-source system without a separate stand. A 38-140 Hz response within 3 dB and an operating range down to 33 Hz at -10 dB cover the typical range of a touring subwoofer without reaching into territory better handled by the mid-high cabinet above. The crossover is handled digitally, making it straightforward to dial in the handoff point for any given system configuration.

Fast Signal-Chain Connections

Two rear-panel NL4 Speakon connectors, marked as signal input (INPUT) and link (LINK), make it quick to add further cabinets to the system without extra signal splitters. A perforated steel grille backed with acoustically transparent foam protects the driver from mechanical damage during transport and on stage, and the built-in mounting for a 100 mm wheel set makes moving the cabinet easier during frequent load-in and load-out.

KEY FEATURES

• Single long-excursion 18-inch driver with a 4-inch voice coil
• Maximum peak SPL of 135 dB
• Passive operation with digitally handled crossover
• M20 mounting socket for a distance pole
• Two integrated handles for easier transport
• Built-in mounting for a 100 mm wheel set
• Two NL4 Speakon connectors: input and link

TECHNICAL SPECIFICATIONS

• Type: single 18-inch, bass-reflex subwoofer
• Frequency range (-10 dB): 33 Hz to 250 Hz
• Frequency response (+/-3 dB): 38 Hz to 140 Hz
• Coverage pattern: omnidirectional
• Power handling: 800 W continuous, 3200 W peak
• System sensitivity (1W/1m): 100 dB
• Maximum SPL (at 1m): 129 dB continuous, 135 dB peak
• LF driver: 18-inch, long-excursion, 4-inch voice coil
• Nominal impedance: 8 Ohm
• Crossover: active, handled by DSP
• Connectors: 2x NL4, pins 1+/1-
• Dimensions (WxHxD): 600 x 660 x 640 mm
• Weight: 43 kg