Sonarworks SoundID Reference Measurement Microphone
Sonarworks SoundID Reference Measurement Microphone

Sonarworks

Sonarworks SoundID Reference Measurement Microphone

Sale price€69,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 31847
Quantity:
This item is available on a custom order basis only

Contact

SoundID Reference Measurement Microphone – precision condenser measurement microphone developed by Sonarworks for accurate acoustic calibration and studio monitoring setup. Each microphone is individually measured and certified against ANSI-standard reference units to ensure exceptional linearity and consistency across the audible frequency spectrum.

Equipped with a high-precision electret condenser capsule and an omnidirectional polar pattern, the SoundID Reference Microphone captures sound with maximum neutrality and minimal coloration. It is ideal for room calibration, speaker alignment, and use with Sonarworks’ SoundID Reference software. The included calibration files (0° on-axis and 30° off-axis) guarantee accurate correction for any setup, enabling precise room response measurement and correction.

The microphone connects via a standard 3-pin XLR connector and requires 48V phantom power. Each unit comes with a downloadable, microphone-specific calibration profile for 0°, 30°, and 90° off-axis positions, ensuring fully traceable accuracy. It is a must-have tool for engineers, producers, and studios aiming for true flat reference monitoring.

KEY FEATURES

  • Professional electret condenser measurement microphone for use with Sonarworks SoundID Reference
  • Omnidirectional polar pattern for accurate room response capture
  • Individually calibrated and certified against ANSI reference microphones
  • Downloadable calibration profiles for 0°, 30°, and 90° off-axis measurements
  • Wide frequency response from 20 Hz to 20 kHz
  • Low self-noise and high dynamic range for precise measurements
  • Requires 48V phantom power via standard XLR 3-pin connection
  • Includes calibration file in .swmic format and on-axis .txt file
  • Compatible with Sonarworks SoundID Reference software (21-day trial available)

TECHNICAL SPECIFICATIONS

  • Transducer type: Electret condenser (MEMS-based)
  • Polar pattern: Omnidirectional
  • Frequency range: 20 Hz – 20 kHz
  • Sensitivity: -37 dB/Pa (14 mV/Pa)
  • Self-noise: 24 dB(A)
  • Signal-to-noise ratio: 65–70 dB(A)
  • Dynamic range: 106 dB
  • Maximum SPL: 124–132 dB
  • Power requirement: 48V phantom power
  • Connector: XLR (3-pin)
  • Included files: 0° calibration (.txt), 30° off-axis calibration (.swmic)
  • Software compatibility: Sonarworks SoundID Reference (21-day trial)

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Accessories and matching products

SSQ POP1
SSQ POP1€13,00