SE ELECTRONICS
sE Electronics sE8 Supercardioid Pair
Choose options
sE Electronics sE8 Supercardioid Pair is two sE8 pencil condensers with supercardioid capsules, sold as a pair with a stereo mounting bar and a flight case. A tight pattern in a stereo layout lets you record a wide scene with less pickup from neighbouring sources.
A stereo image without matching mics by ear
The biggest problem in stereo recording is two microphones that do not hear the same: the image wanders and the centre smears when you make adjustments. sE selects the capsules for a pair from hundreds of individual units so they have virtually identical sensitivity and the highest possible correlation across the whole frequency range. The supercardioid pattern also limits pickup from the sides, which helps on overheads, a choir or a band in one room.
A ready kit for stage and studio
The pair comes with a precision stereo bar, two mic clips, two protective windscreens and a robust metal flight case. The bar fixes the spacing between the microphones, so you can repeat the same setup on the next session. Each microphone has a 10/20 dB pad and an 80/160 Hz low-cut filter, and max SPL reaches 159 dB with the 20 dB pad, so the pair also copes with cymbals and loud instruments. The same case and bar make it easy to move the setup between studio, rehearsal room and stage.
KEY FEATURES
- Two sE8 Supercardioid microphones with factory-matched capsules
- Hand-crafted 1/2 inch capsules with gold-sputtered diaphragms
- Stereo bar, two mic clips, two windscreens
- Metal flight case
- 10/20 dB pad and 80/160 Hz low-cut filter on each microphone
- Suggested sources: overheads, choir, orchestra and strings, piano, acoustic guitar
TECHNICAL SPECIFICATIONS
- Type: matched pair of small-diaphragm condenser microphones, supercardioid pattern
- Capsule: 1/2 inch, hand-crafted, matched as a pair
- Frequency range: 20 Hz - 20 kHz
- Max SPL: 139 / 149 / 159 dB (0 / 10 / 20 dB pad, 0.5% THD at 1 kHz)
- Equivalent noise level: 13 dB
- Electrical impedance: 110 Ohms, recommended load above 1 kOhm
- Low-cut filter: 80 / 160 Hz, 6 dB/oct.
- Powering: 48 V phantom (P48), 3-pin XLR connector
- Microphone dimensions: diameter 23 mm (0.91 in), length 120 mm (4.72 in); weight 141 g (4.97 oz)
- In the box: 2 microphones, stereo bar, 2 mic clips, 2 windscreens, metal flight case
