Samar Audio Design AL959 is the stereo version of the AL95: two matched piston ribbon motors in one body, placed as close together as possible so that phase between the channels stays coherent up to high frequencies. A practical alternative to two microphones in a Blumlein or MS setup.
One microphone, one cable, full stereo
The AL959 connects with a single four-conductor cable and a Y splitter at the end that turns a 5-pin XLR into two 3-pin XLRs. On a gig, on location or in a small room you put up one unit instead of two stands and two cables.
The design came from Samar's founder, Dr. Mark Fouxman. The uni-body construction and low part count explain the low price for a stereo ribbon made entirely in the USA. It comes in an injection-moulded case with a clip and the Y splitter, and Samar gives 15 days to judge the sound.
Piston ribbon in stereo
As in the AL95, the piston ribbon gives lower noise, deeper bass and high SPL handling, and the toroidal transformers descend from the flagship MF65. It works as a main pair for orchestra, choir and small groups in classical, jazz or rock, and on overheads, piano, guitar and stereo room recordings.
For people recording solo and in small rooms it is a convenient way to get stereo from a single stand, without measuring angles and spacing between microphones. The piston ribbon is also more robust than a classic one, so the microphone needs no special precautions when transported to a gig.
KEY FEATURES
- Stereo ribbon microphone with two piston motors
- Matched elements placed close together
- Blumlein and MS techniques without two microphones
- In-house hand-wound toroidal transformers
- 5-pin XLR cable with a Y splitter to two 3-pin XLRs
- Injection-moulded carrying case and clip included
- Made in the USA, 1-year parts and ribbon warranty (two services)
TECHNICAL SPECIFICATIONS
- Type: stereo, passive
- Pickup pattern: figure 8
- Frequency response: 20 Hz - 25 kHz
- Ribbon: piston, 38 x 6.35 mm, 4 microns
- Sensitivity: 1.6 mV/Pa
- Output impedance: 250 ohms
- Dimensions: 241 x 25 mm (9.5 x 1 in)
- Weight: 232 g (8.2 oz)





