



Samar Audio Design
Samar Audio Design AL95 + AL AcHve Bundle Matched Pair Matched Ribbon Pair and Two Preamps Bundle
Choose options
Samar Audio Design AL95 + AL AcHve Bundle Matched Pair is a pair of Samar AL95 ribbon microphones matched by the manufacturer together with two in-line AL Active preamps. Two piston-ribbon mics with a figure-8 pattern and two modules that lift the level by 18 dB make a complete stereo ribbon chain.
Why these two belong together
The AL95 offers 1.6 mV/Pa sensitivity and a 250 ohm impedance, like most passive ribbons, which means a preamp with plenty of gain in reserve. The AL Active plugs straight into the microphone's XLR, gives 18 dB and a load of about 10 kilohms, at which a ribbon sounds most open. No extra cable and no solid-state device in the gain path.
A piston ribbon is more robust than a regular zig-zag one, so in the studio and at rehearsals it needs no special care, and each AL Active weighs 90 g and does not burden the microphone clip. Everything is built in Salt Lake City.
Stereo without hunting for a second preamp
Each microphone gets its own AL Active plugged into its XLR, so both channels share the same gain and a load of about 10 kilohms. A Blumlein or MS rig, overheads, room and strings get a matched chain without extra cables. The modules need 48 V phantom power, and Samar gives a 1-year warranty on the AL95 and the AL Active.
KEY FEATURES
- Matched microphone pair and two AL Active modules
- Bundle: AL95 ribbon microphone and AL Active preamp
- Piston ribbon, figure-8 pattern
- 18 dB of gain from a toroidal transformer
- Module plugs directly into the microphone's XLR
- Injection-moulded carrying case and shock-proof clip
- Made in the USA, 1-year warranty
TECHNICAL SPECIFICATIONS
- AL95 (2 pcs): figure 8, 20 Hz - 25 kHz, 1.6 mV/Pa, 250 ohms, 182 g
- AL Active (2 pcs): 18 dB gain, 48 V phantom, 65 ohms, 90 g
- AL95 dimensions: 142 x 25 mm
- AL Active dimensions: 95 x 25 mm
- Supplied as: 2 microphones matched by the manufacturer and 2 modules


