Royer Labs SF24V

Royer Labs

Royer Labs SF24V

Sale price€5.959,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 28596
Quantity:
This item is available on a custom order basis only

Contact

Royer Labs SF-24V is a stereo vacuum tube ribbon microphone — the pinnacle of Royer's SF series and the world's first commercially produced stereo ribbon microphone with tube electronics. Two matched 1.8-micron aluminum ribbon elements are mounted one above the other in a true coincident Blumlein configuration (crossed figure-eights, 45 degrees off axis), each driven through an independent tube circuit derived from the same electronics as Royer's TEC Award-winning mono R-122V. The tubes are JAN military-specification 5840W pentodes wired in triode configuration as cathode followers, burned in at the Royer factory before shipment. Output signals are transformer-coupled and galvanically isolated via Jensen transformers housed in the dedicated external power supply, which also contains the plate supply (135 VDC) and filament supply (6 VDC) sections.

Tube electronics — headroom, detail, and air

The triode cathode follower configuration eliminates typical tube coloration while retaining the advantages of thermionic technology: greater headroom and faster transient response compared to the FET-based SF-24. The higher output level comes entirely from the internal toroidal step-up transformers (free gain) — the tube circuit itself operates below unity gain and contributes no noise of its own; self-noise remains below 18 dB. Jensen transformers in the power supply provide galvanic isolation and output balancing, virtually eliminating induced noise on long cable runs. Active tube electronics maintain a constant, optimal impedance load on both ribbon elements regardless of the downstream preamp's input characteristics — the SF-24V works with any professional preamplifier without impedance matching concerns or overload risk. Output impedance is 450 ohms — higher than the FET SF-24's 200 ohms, a result of the transformer-coupled output stage.

Stereo configurations and mono operation

The Blumlein configuration — two figure-eights at 90 degrees — provides true single-point stereo capture with no inter-channel time-of-arrival delay to correct. Alternatively, the SF-24V operates in M/S configuration with standard matrix processing in the console or DAW. Phase compatibility between the two channels is complete — stereo-to-mono summing produces no artifacts, which makes the microphone viable as a wide mono source when capturing performers with unstable positioning relative to a single-axis microphone. Each channel can be used independently as a standalone mono figure-eight microphone. The SF-24V ships with a dedicated external power supply, a 7-pin XLR cable, shockmount, and a handcrafted Padauk wood presentation case. Lifetime warranty to the original owner.

KEY FEATURES

  • World's first commercially produced stereo vacuum tube ribbon microphone
  • Two matched 1.8-micron aluminum ribbons in Blumlein configuration (figure-eights, 45° off axis)
  • Two independent tube circuits: JAN mil-spec 5840W pentode wired in triode configuration
  • Tubes burned in at Royer factory before shipment
  • Tube electronics derived from TEC Award-winning R-122V
  • Greater headroom and faster transient response than FET SF-24
  • Sensitivity -38 dB — condenser microphone output level
  • Self-noise below 18 dB — free gain from toroidal transformers, no noise from tube stage
  • Jensen transformers in power supply: galvanic isolation and balanced output
  • Constant optimal ribbon load impedance regardless of preamp
  • Supports Blumlein and M/S configurations from a single mic position
  • Full phase compatibility — stereo-to-mono summing without artifacts
  • Each channel independently usable as a mono figure-eight microphone
  • Ribbon elements protected from phantom power, electrical transients, and miswired cables
  • Dedicated external power supply (135 VDC plate / 6 VDC filament)
  • Handcrafted Padauk wood presentation case; lifetime warranty

TECHNICAL SPECIFICATIONS

  • Acoustic operating principle: electrodynamic pressure gradient with vacuum tube electronics
  • Vacuum tube: JAN mil-spec 5840W pentode, triode-wired cathode follower
  • Polar pattern: crossed figure-eights (Blumlein)
  • Generating element: 1.8-micron aluminum ribbon
  • Frequency response: 30–15,000 Hz +/- 3 dB
  • Sensitivity: -38 dB (re. 1V/Pa +/-1 dB)
  • Self-noise: below 18 dB
  • Output impedance: 450 ohms @ 1 kHz
  • Recommended load impedance: 1,500 ohms or greater
  • Maximum SPL: above 130 dB
  • Microphone output connector: XLR 7-pin (stereo)
  • Power supply output connectors: 2x XLR 3-pin
  • Power requirements: plate 135 VDC @ 2 mA; filament 6 VDC @ 150 mA (dedicated PSU)
  • Supply current: 4 mA per channel
  • Microphone dimensions: 270 mm x 39 mm (base) x 25 mm (top)
  • Weight: 583 g (20.5 oz)
  • Finish: Dull Satin Nickel; optional Optical Black
  • Includes: SF-24V microphone, dedicated power supply, 7-pin XLR cable, shockmount, Padauk wood case

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Accessories and matching products

SSQ POP1
SSQ POP1€13,00