Royer Labs SF2 Matched Pair
Royer Labs SF2 Matched Pair

Royer Labs

Royer Labs SF2 Matched Pair

Sale price€5.201,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 28595
Quantity:
This item is available on a custom order basis only

Contact

Royer Labs SF-2 Matched Pair consists of two factory-matched SF-2 active ribbon microphones selected for identical sensitivity and frequency response, assembled as a stereo set for classical recording, scoring, and acoustic instrument applications. Factory matching is critical in stereo configurations — ORTF, X-Y, wide ambient overhead — where any mismatch between the two microphones directly affects stereo imaging accuracy and channel balance. The technical specification is fully identical to the single SF-2: crossfield motor assembly with four Neodymium magnets and Permendur pole pieces, 1.8-micron aluminum ribbon, active electronics at -38 dB sensitivity, and self-noise below 18 dB. Twenty SF-2 prototypes circulated across major studios and scoring stages for years before commercial release, establishing the model's reputation in classical and film recording circles before it ever appeared in a catalog.

Crossfield motor and active electronics — two defining factors

The proprietary crossfield motor minimizes the front-to-rear acoustic path length inside the capsule: four Neodymium magnets surrounding the ribbon with Permendur iron pole pieces reduce this path to the shortest possible distance, enabling a flat response across 30 Hz – 15 kHz +/- 2 dB without artificial high-frequency boost. This distinguishes the SF-2 from most ribbon microphones in the same price bracket, where the upper frequency limit is often a practical constraint, not a design achievement. The 1.8-micron aluminum ribbon's low mass delivers fast transient response — audible and measurable on strings, woodwinds, piano, and percussion. Active electronics — a hand-wired FET circuit with a custom toroidal transformer — provide 14 dB of free gain with no added noise and maintain constant optimal impedance loading on the ribbon regardless of what preamp follows in the chain. The 200-ohm output supports long cable runs without HF degradation.

Matched pair — stereo and M/S without level adjustment

Factory matching eliminates the need to calibrate levels or correct tonal character between channels when setting up stereo configurations. The symmetrical figure-eight pattern makes each microphone usable as the Side element in an M/S array, where sensitivity matching between Mid and Side has a direct impact on stereo width after matrixing. The SF-2 operates as a complete, self-sufficient microphone — requiring no high-gain specialist preamp and no impedance matching considerations from the console. The ribbon element is fully protected against phantom power, miswired cables, and electrical transients. Primary applications: choir and orchestra, classical piano, strings, woodwinds, harp, acoustic guitar and other plucked instruments, voice-over, ambient miking, room recording. Lifetime warranty to original owner; first ribbon replacement free.

KEY FEATURES

  • Two factory-matched SF-2 microphones with identical sensitivity and frequency response
  • Proprietary crossfield motor: 4x Neodymium magnets + Permendur pole pieces — minimal acoustic path, maximum HF extension
  • 1.8-micron aluminum ribbon — low mass, fast transient response
  • Active Ribbon electronics: -38 dB sensitivity — condenser microphone output level
  • 14 dB free gain from toroidal transformer — zero added noise from active circuit
  • Self-noise below 18 dB
  • Constant optimal ribbon load impedance regardless of preamp characteristics
  • 200-ohm output — long cable runs without HF loss
  • Flat frequency response: 30 Hz – 15 kHz +/- 2 dB
  • Negligible off-axis coloration; consistent response regardless of incidence angle
  • Symmetrical figure-eight — each microphone usable as Side element in M/S
  • Stainless steel body with internal baffle and damper; low external magnetic leakage
  • Gold-plated XLR output connectors
  • Ribbon elements protected from phantom power, miswired cables, and electrical transients
  • Lifetime warranty to original owner; first ribbon replacement free

TECHNICAL SPECIFICATIONS

  • Acoustic operating principle: electrodynamic pressure gradient with active electronics
  • Polar pattern: figure-8
  • Generating element: 1.8-micron aluminum ribbon
  • Motor assembly: crossfield — 4x Neodymium magnets + Permendur iron pole pieces
  • Frequency response: 30–15,000 Hz +/- 2 dB
  • Sensitivity: -38 dBv re. 1V/Pa
  • Self-noise: below 18 dB
  • Output impedance: 200 ohms @ 1 kHz
  • Rated load impedance: above 1,500 ohms
  • Maximum SPL: above 130 dB
  • Output connector: XLR 3-pin (Pin 2 Hot), gold-plated
  • Power requirements: 48V phantom, 4 mA per microphone
  • Dimensions: 142 mm (L) x 39 mm (base) x 25 mm (top)
  • Weight: 448 g (15.8 oz) per microphone
  • Finish: Matte Black
  • Includes: two SF-2 microphones, SFS-2 shockmounts, mic socks, aluminum carrying case

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

The delivery cost depends on the destination country:

  • 15 euros: Germany, Austria, Belgium, the Netherlands, Czechia, Denmark, Estonia, Latvia, Hungary, Slovakia, Croatia, Slovenia
  • 20 euros: France, Italy, Spain, Lithuania, Luxembourg, Sweden, Finland, Bulgaria, Romania
  • 25 euros: Ireland, Portugal, Greece
  • 35 euros: Cyprus, Malta

Orders over 250 EUR ship free (over 500 EUR for Cyprus and Malta). Free delivery does not apply to oversized items.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

The delivery cost depends on the destination country:

  • 15 euros: Germany, Austria, Belgium, the Netherlands, Czechia, Denmark, Estonia, Latvia, Hungary, Slovakia, Croatia, Slovenia
  • 20 euros: France, Italy, Spain, Lithuania, Luxembourg, Sweden, Finland, Bulgaria, Romania
  • 25 euros: Ireland, Portugal, Greece
  • 35 euros: Cyprus, Malta

Orders over 250 EUR ship free (over 500 EUR for Cyprus and Malta). Free delivery does not apply to oversized items.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Accessories and matching products

SSQ POP1
SSQ POP1€13,00