Royer Labs R122V Matched Pair

Royer Labs

Royer Labs R122V Matched Pair

Sale price€8.509,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 48275
Quantity:
This item is available on a custom order basis only

Contact

Royer Labs R-122V Matched Pair consists of two hand-matched vacuum tube ribbon microphones — the pinnacle of Royer's R-Series line and the world's first commercially produced active vacuum tube ribbon microphone. Each pair is hand-selected for sensitivity matching within 0.5 dB and frequency response within +/-1 dB. The R-122V uses the same ribbon transducer assembly as the R-121 and R-122 — 2.5-micron aluminum ribbon with patented offset placement (Patent #6,434,252) and Neodymium magnets — but replaces the FET active circuit with a JAN military-specification 5840W vacuum tube in triode cathode follower configuration, coupled to a Jensen output transformer. The high plate voltage of the tube supply (135 VDC) provides headroom far beyond what phantom power can deliver.

JAN 5840W and Jensen — tube architecture without tube coloration

The triode cathode follower configuration is specifically designed to eliminate typical tube harmonic coloration — this is a circuit built for transparency, not character. The higher output level comes entirely from Royer's custom-wound toroidal step-up transformer (free gain) — the tube circuit itself operates below unity gain and contributes no noise of its own; self-noise remains below 18 dB. The Jensen output transformer housed in the external power supply provides galvanic isolation and balanced output, virtually eliminating induced noise on long cable runs. The triode cathode follower configuration is inherently resistant to HF loss on extended cable runs — a practical advantage in orchestral and live recording environments where the distance from microphone to console can be substantial. Active tube electronics maintain constant, optimal impedance loading on the ribbon element regardless of the downstream preamp's input characteristics.

Patented offset ribbon and precision-matched stereo pair

The patented offset ribbon design (Patent #6,434,252) — shared across the entire R-series — positions the ribbon element closer to the front of the housing for higher SPL handling from the logo side and ribbon protection at maximum excursion. The rear side captures a slightly brighter response at approximately three feet and closer (phase reversed in this position) — two distinct tonal characters from one transducer. Precision factory matching eliminates the need to calibrate levels or compensate for tonal differences between channels in ORTF, X-Y, or Decca Tree configurations. Applications: electric guitar, brass, drum overheads and rooms, strings, woodwinds, piano, acoustic guitar, vocals, classical and orchestral recording. Each pair is supplied with two power supplies, two locking 25-foot cable assemblies, two RSM-1 shockmounts, and two protective wooden cases. Lifetime warranty to original owner; first ribbon replacement free.

KEY FEATURES

  • Two hand-matched R-122V microphones: sensitivity within 0.5 dB, frequency response within +/-1 dB
  • World's first commercially produced active vacuum tube ribbon microphone
  • Same ribbon transducer as R-121 and R-122: 2.5-micron ribbon, Neodymium magnets
  • JAN mil-spec 5840W pentode in triode cathode follower configuration
  • High plate voltage headroom (135 VDC) — unavailable from phantom power
  • Sensitivity -36 dB — condenser microphone output level
  • Self-noise below 18 dB — free gain from toroidal transformer, no noise from tube stage
  • Jensen output transformer in PSU: galvanic isolation and balanced output
  • Triode cathode follower: long cable runs without HF loss
  • Constant optimal ribbon load impedance regardless of preamp
  • 200-ohm balanced output
  • Patented offset ribbon design (Patent #6,434,252) — high SPL front, brighter character rear
  • Ribbon element protected from phantom power, electrical transients, miswired cables
  • Lifetime warranty to original owner; first ribbon replacement free

TECHNICAL SPECIFICATIONS

  • Acoustic operating principle: electrodynamic pressure gradient with vacuum tube electronics
  • Vacuum tube: JAN mil-spec 5840W pentode, triode-wired cathode follower
  • Polar pattern: figure-8
  • Generating element: 2.5-micron aluminum ribbon (99.99% Al)
  • Magnets: rare earth Neodymium
  • Frequency response: 30–15,000 Hz +/- 3 dB
  • Sensitivity: -36 dB (re. 1V/Pa +/-1 dB)
  • Self-noise: below 18 dB
  • Output impedance: 200 ohms, balanced
  • Rated load impedance: 1k ohm minimum
  • Maximum SPL: above 135 dB @ 20 Hz
  • Power requirements: plate 135 VDC @ 2 mA; filament 6 VDC @ 150 mA (dedicated PSU)
  • Dimensions: 206 mm (L) x 25 mm (W)
  • Weight: 300 g (10.9 oz) per microphone
  • Finish: Dull Satin Nickel; optional Matte Black Chrome
  • Includes: 2x R-122V, 2x dedicated power supply, 2x locking 25-ft cable assembly, 2x RSM-1 shockmount, 2x wooden case

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Accessories and matching products

SSQ POP1
SSQ POP1€13,00