RME ADI-2/4 Pro EX
RME ADI-2/4 Pro EX

RME

RME ADI-2/4 Pro EX

Sale price€2.589,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 60219
Quantity:
In stock

Contact

RME ADI-2/4 Pro EX is a 2-in, 4-out 768 kHz AD/DA converter in a half-rack 1U case, with two headphone amplifiers, digital I/O and a USB-C interface. It brings the latest ESS converters (ES9823Pro and ES9039Q2M) to the familiar ADI-2/4 Pro design.

One unit instead of a stack of boxes

A typical chain needs a converter, a headphone amp, a phono preamp and a computer interface. The ADI-2/4 Pro EX folds them into one case: two servo-balanced XLR/TRS analog inputs, line outputs on XLR and TRS, two stereo headphone outputs on the front (including balanced Pentaconn for headphones and IEMs) plus AES, S/PDIF and ADAT. As a computer interface it runs in stereo mode (2 in, 2 out) or multichannel mode (6 in, 8 out). Reference levels reach down to -35 dBu, so a dynamic microphone can connect directly, and RIAA equalization in Line mode at 0 dB gain lets you use an external phono preamp.

Clock, protection and control

The SteadyClock EX internal clock is factory-calibrated to 1 ppm, and you can trim the sample rate by 50 ppm in 0.1 ppm steps to sync with gear that has no word clock. Each headphone output has its own DC protection, and the power supply has active protection against reversed polarity and overvoltage. The USB-C port locks, is class compliant (UAC 2.0) with iOS, macOS, Linux and Windows 10, and a 1.8 m cable is included. Control is from the front panel, the remote or the ADI-2 Remote app.

KEY FEATURES

  • ESS converters: ES9823Pro (ADC) and ES9039Q2M (DAC), sample rates up to 768 kHz
  • 2 analog XLR/TRS combo inputs (servo-balanced), 4 DA output channels
  • Two headphone outputs with up to 2.4 W per channel into 32 Ohms, balanced Pentaconn output
  • AES (XLR, via breakout cable), coaxial and optical S/PDIF, ADAT
  • Lockable USB-C (UAC 2.0), stereo 2/2 and multichannel 6/8 modes
  • SteadyClock EX, 1 ppm accuracy, +/-50 ppm trim
  • Reference levels down to -35 dBu, RIAA in Line mode, 94 kOhm and 47 kOhm input impedance
  • DC protection on headphone channels and power supply, ground terminal
  • RME remote with four programmable buttons (Multi-Remote Support)

TECHNICAL SPECIFICATIONS

  • Analog inputs: 2 x XLR/TRS combo, sensitivity +24/+19/+13/+7/+1 dBu at 0 dBFS
  • Input SNR at +24 dBu: 125 dB (AES17), 127 dBA
  • Input THD at -1 dBFS: below -127 dB; channel separation: above 130 dB
  • Analog outputs: XLR and TRS, max level +26.5 dBu (XLR), SNR 124 dB (AES17)
  • Headphone output: 2.4 W per channel into 32 Ohms; balanced mode up to 3.85 W into 32 Ohms
  • Digital inputs: AES, coaxial S/PDIF, optical (S/PDIF/ADAT); outputs: AES, coaxial S/PDIF, optical
  • Supported sample rates: 44.1 kHz - 768 kHz
  • Power: external PSU 100-240 V AC, 40 W, locking connector; 30 W max consumption
  • Dimensions: 215 x 44 x 160 mm (W x H x D); weight 1.2 kg (2.2 lb)
  • In the box: 1.8 m USB-C cable, external power supply, AES breakout cable

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.