Moog Model 210 is a 2x10 inch active FRFR instrument amplifier delivering 550W RMS, the flagship for larger stages and extended keyboard rigs. The signal path is fully analog with effectively zero latency, and the two woofers in a 2.5-way design give the low-end headroom that synth bass lines and electronic drums demand.
A whole rig behind one grille
The 4-channel stereo mixer takes several keyboards, a drum machine and a playback source at once. Channel 1 has an XLR microphone input, and the 3-band Baxandall EQ fits the sound of the whole mix to the room. Model 210 also works as a monitor for guitar and bass modeling processors, and the flat FRFR response reproduces the tone you dialed in on the processor without adding color.
Load-in and PA integration
Balanced stereo XLR and TRS outputs feed front of house while the amp stays on stage as your monitor. Stereo Link turns two units into a stereo system. A top handle, two side handles and removable casters make load-in easier, and the headphone output and Bluetooth 6.0 help at rehearsal.
KEY FEATURES
- All-analog FRFR signal path with no perceptible latency
- 550W RMS bi-amplified, dual 10 inch woofers and 1 inch compression driver in a 2.5-way design
- 4-channel stereo mixer with an XLR microphone input on channel 1
- 3-band Baxandall master EQ
- Balanced stereo XLR and TRS outputs plus Stereo Link
- Headphone output and Bluetooth 6.0
- Tolex-wrapped wood cabinet, top handle, two side handles, removable casters
TECHNICAL SPECIFICATIONS
- Type: active FRFR instrument amplifier, analog signal path
- System power: 1100W peak, 550W RMS (510W LF + 40W HF), bi-amplified
- Design: 2.5-way
- Woofers: 2 x 10 inch
- High frequency driver: 1 inch compression driver
- Frequency response: 38 Hz - 20 kHz (-3 dB), 35 Hz - 23 kHz (-10 dB)
- Coverage: 100 x 100 degrees
- Mixer: 4 analog stereo channels, TRS line inputs, XLR microphone input on channel 1
- EQ: 3-band Baxandall master
- Connectivity: Bluetooth 6.0 (A2DP, AVRCP), 2 x XLR and 2 x TRS balanced outputs, Stereo Link, headphone output
- Power: 220-240 V AC, 50 Hz, IEC connector
- Dimensions (H x W x D): 56.0 x 61.5 x 33.7 cm
- Weight: 31.7 kg






