Lynx Studio LYN-ANM04-DNT is a configuration of the Lynx Aurora(n) AD/DA converter in a 1U case: an LM-A4 module with 4 monitor outputs on TRS jacks. The 24-bit conversion up to 192 kHz uses the same signal path Lynx applies across the Aurora(n) series, and the configuration is built at the factory. See Lynx in our Warsaw showroom.
A ready configuration instead of assembling card by card
The Aurora(n) has four module positions, and every module has to be matched to the rest of the setup. Here you get a ready configuration: an LM-A4 module with 4 monitor outputs on TRS jacks. According to Lynx the analog outputs have a dynamic range of 120 dB (A-weighted, -60 dBFS method). The SynchroLock 2 clock with a word clock input and three outputs on BNC lets you sync the rest of the studio.
Connection to the computer or network
The LT-DANTE card is a two-port Dante network card that supports up to 32 channels at 96 kHz and up to 16 channels at 192 kHz. Lynx notes that the card can be installed in an existing converter after a free firmware update.
KEY FEATURES
- An LM-A4 module with 4 monitor outputs on TRS jacks
- 24-bit conversion up to 192 kHz, SynchroLock 2 clock
- BNC word clock: 1 input and 3 outputs
- Connectivity: LT-DANTE card, two Dante ports, up to 32 channels at 96 kHz and up to 16 channels at 192 kHz
TECHNICAL SPECIFICATIONS
- Type: AD/DA converter in an Aurora(n) configuration, 1U case
- Configuration: an LM-A4 module with 4 monitor outputs on TRS jacks
- Computer interface: LT-DANTE card, two Dante ports, up to 32 channels at 96 kHz and up to 16 channels at 192 kHz
- Conversion: 24-bit, up to 192 kHz
- Line output dynamic range: 120 dB (A-weighted, -60 dBFS)
- Line output THD+N: -108 dB (1 kHz, -1 dBFS, 20 kHz filter, +20 dBu trim)
- Clock: SynchroLock 2, BNC word clock (1 input, 3 outputs)
- Dimensions: 19 in (483 mm) wide, 1.7 in (44.5 mm) high, 10 in (254 mm) deep
- Order code: LYN-ANM04-DNT
