Lynx Studio LYN-AN24P04-HD2 is a configuration of the Lynx Aurora(n) AD/DA converter in a 1U case: 24 analog line inputs and 24 outputs (D-sub 25, 3 connector(s) for inputs and 3 for outputs) and an LM-PRE4 module with 4 microphone preamps. The 24-bit conversion up to 192 kHz uses the same signal path Lynx applies across the Aurora(n) series, and the configuration is built at the factory. See Lynx in our Warsaw showroom.
A ready configuration instead of assembling card by card
The Aurora(n) has four module positions, and every module has to be matched to the rest of the setup. Here you get a ready configuration: 24 analog line inputs and 24 outputs (D-sub 25, 3 connector(s) for inputs and 3 for outputs) and an LM-PRE4 module with 4 microphone preamps. According to Lynx the analog path has a dynamic range of 119 dB on the input and 120 dB on the output (A-weighted, -60 dBFS method). The SynchroLock 2 clock with a word clock input and three outputs on BNC lets you sync the rest of the studio.
Connection to the computer or network
The LT-HD2 card connects the converter to Pro Tools HD and HDX through two mini-DigiLink ports (Primary and Expansion) to HD Core, Accel Core, HDX or Native cards, at sample rates up to 192 kHz. According to Lynx, an Aurora(n) 16 with an LM-DIG module gives up to 32 channels of conversion per card.
KEY FEATURES
- 24 analog line inputs and 24 outputs (D-sub 25, 3 connector(s) for inputs and 3 for outputs)
- An LM-PRE4 module with 4 microphone preamps
- 24-bit conversion up to 192 kHz, SynchroLock 2 clock
- BNC word clock: 1 input and 3 outputs
- Connectivity: LT-HD2 card for Pro Tools HD and HDX, Primary and Expansion mini-DigiLink ports, up to 192 kHz
TECHNICAL SPECIFICATIONS
- Type: AD/DA converter in an Aurora(n) configuration, 1U case
- Configuration: 24 analog line inputs and 24 outputs (D-sub 25, 3 connector(s) for inputs and 3 for outputs)
- Configuration: an LM-PRE4 module with 4 microphone preamps
- Computer interface: LT-HD2 card for Pro Tools HD and HDX, Primary and Expansion mini-DigiLink ports, up to 192 kHz
- Conversion: 24-bit, up to 192 kHz
- Line input dynamic range: 119 dB, line output: 120 dB (A-weighted, -60 dBFS)
- Line input THD+N: -113 dB, line output: -108 dB (1 kHz, -1 dBFS, 20 kHz filter, +20 dBu trim)
- Clock: SynchroLock 2, BNC word clock (1 input, 3 outputs)
- Dimensions: 19 in (483 mm) wide, 1.7 in (44.5 mm) high, 10 in (254 mm) deep
- Order code: LYN-AN24P04-HD2
