Looptrotter SATurAMP

Looptrotter

Looptrotter SATurAMP

Sale price€789,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 61018
Quantity:
This item is available on a custom order basis only

Contact

Looptrotter SATurAAMP is a 500-series preamp built around a clean Class-A signal path and a solid-state saturation circuit lifted from vintage tape machines and analog consoles. Instead of another transparent preamp fighting for rack space, you get a unit that colors the signal on purpose, from subtle density to clearly audible harmonic grit.

A transformer that does the work

The mic/line input runs through a SOWTER transformer modeled on the AP2620, the same unit found in classic API preamps. That is where the thick, dense midrange comes from, a character that discrete electronics alone cannot replicate. The 1M ohm instrument input uses its own discrete Class-A transistor stage enriched with an FET stage, so guitars and basses get a dedicated gain path instead of sharing a compromise circuit with mic sources.

Saturation you can see, not guess

Total gain reaches 66dB (60dB of gain plus 6dB on the output stage) and is digitally controlled in 1dB steps, so settings recall exactly from session to session. Two LEDs mark THD at 4% and 8%, letting you dial in saturation by eye instead of guessing in the dark. Three 12dB/octave high-pass filters (60Hz Chebyshev, 100Hz Butterworth, 160Hz Bessel) clean up the low end before it hits the saturation stage, keeping bass frequencies from turning muddy when the drive gets pushed hard.

KEY FEATURES

  • Discrete Class-A preamp in 500-series format
  • Solid-state saturation circuit inspired by tape and analog consoles
  • SOWTER AP2620-based transformer on the mic/line input
  • 1M ohm instrument input with discrete transistors and FET stage
  • Digitally controlled gain in 1dB steps, -20dB pad
  • Three 12dB/octave high-pass filters: 60Hz, 100Hz, 160Hz
  • THD LEDs at 4% and 8%, output level and peak indicators
  • Switchable 48V phantom power and phase invert

TECHNICAL SPECIFICATIONS

  • Format: 500 series
  • Maximum gain: 66dB (60dB + 6dB output)
  • Gain control: digital, 1dB steps
  • Pad: -20dB
  • Instrument input impedance: 1M ohm
  • Input transformer: SOWTER, AP2620-based
  • High-pass filters: 60Hz Chebyshev, 100Hz Butterworth, 160Hz Bessel (12dB/oct)
  • Phantom power: 48V, switchable
  • Additional functions: phase invert, mute

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.