Locomotive Audio Copperline
Locomotive Audio Copperline

Locomotive Audio

Locomotive Audio Copperline

Sale price€1.065,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 61006
Quantity:
This item is available on a custom order basis only

Contact

Locomotive Audio Copperline isn't a preamp or a compressor, it's a two-channel signal-conditioning tool that sits between a microphone and a preamp, or between two line-level devices. Instead of amplifying or colouring the sound, it manages phantom voltage, level, filtering and polarity before the signal moves further down the chain. It's the only device of this type in the Locomotive Audio catalogue, the rest of the brand's range is preamps, compressors and DI boxes.

Adjustable phantom power instead of a fixed +48V

A patent-pending phantom power source, adjustable up to 52V, ramps up over 5 seconds on turn-on, protecting older, delicate ribbon and tube microphone transformers from a voltage spike at startup. For microphones that want something other than standard phantom, that's a function a typical single-voltage preamp doesn't offer.

An attenuator, a filter and a vintage load in one module

A 5-position attenuator (Unity, 15, 20, 30, 40dB) and a 5-position high-pass filter (off, 45, 75, 150, 300Hz) on a mu-metal shielded inductor give control over level and low-end content before the preamp even sees the signal. A polarity switch, a mute that works independently of every other setting, and a "Vintage Ω" load, an 825Ω resistor switched across XLR pins 2 and 3, simulate the low-impedance input of older gear. It's particularly useful when working with older ribbon or tube microphones that are sensitive to standard +48V, or when building a custom signal chain ahead of a specific preamp.

KEY FEATURES

  • 2-channel mic/line signal-conditioning module
  • Adjustable phantom power up to 52V, 5-second ramp (patent pending)
  • 5-position attenuator: Unity / 15 / 20 / 30 / 40dB
  • 5-position high-pass filter: off / 45 / 75 / 150 / 300Hz
  • Polarity switch and independent mute
  • "Vintage Ω" load (825Ω across XLR pins 2/3)
  • Mu-metal shielded inductor in the filter path
  • Hand-built in the USA

TECHNICAL SPECIFICATIONS

  • Type: 2-channel mic/line conditioning module
  • Phantom power: adjustable, up to 52V, 5-second ramp
  • Attenuator: Unity / 15 / 20 / 30 / 40dB
  • Input impedance at 15-40dB: 1200-1500Ω
  • High-pass filter: off / 45 / 75 / 150 / 300Hz
  • "Vintage Ω" load: 825Ω (XLR pins 2/3)
  • Connectors: XLR in/out per channel

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.