LEWITT LCT 40 Tr

LEWITT

LEWITT LCT 40 Tr

€66,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 60658
Quantity:
This item is available on a custom order basis only

Contact

LEWITT LCT 40 Tr — an 11-pin microphone cable with gold-plated XLR connectors, 5m in length, built for the LCT 840 and LCT 940 tube/FET combination microphones.

This cable is the essential link between the microphone capsule and its external tube power supply on the hybrid LCT 840 and LCT 940 designs, where signal, power, and polar-pattern control all travel over a single, multi-pin connector. Without the right 11-pin cable, the complex tube-powering and pattern-switching system stays inaccessible — a standard 3-pin XLR mic cable can't carry that functionality.

One Connection for Signal, Power, and Mode Control

Hybrid tube/FET microphones need to carry more than just an audio signal — the tube power supply also has to deliver heater and plate voltage to the tube, and receive polar-pattern switching commands from a remote control panel. LCT 40 Tr solves this with an 11-pin XLR connector that bundles all these functions into one dedicated cable, removing the need to run several separate cables between the capsule and the power supply.

Stable Transmission Without Quality Loss Over 5 Meters

In a typical setup with the tube microphone in a vocal booth, away from the power supply sitting in the control room, conductor resistance and shielding quality determine how clean the signal arrives at the tube preamp and how stable the tube's supply voltages remain. The cable's oxygen-free copper (OFC) construction with low resistance minimizes signal loss across the full 5-meter run, preserving the microphone's tonal character without added noise from substandard wiring.

KEY FEATURES

  • 11-pin XLR cable dedicated to the LCT 840 and LCT 940 microphones
  • 5m length
  • Gold-plated XLR connectors (female/male on opposite ends)
  • Oxygen-free copper (OFC) construction, low resistance
  • Simultaneously carries audio signal, tube power, and mode control
  • Identical to the cable factory-bundled with the microphone set
  • Designed exclusively for use with the LCT 840 / LCT 940 microphones

TECHNICAL SPECIFICATIONS

  • Connector type: 11-pin XLR (male/female on opposite ends)
  • Length: 5m
  • Conductor material: oxygen-free copper (OFC)
  • Connector finish: gold-plated
  • Compatibility: Lewitt LCT 840 and LCT 940 microphones

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.