LEWITT LCT 1040
LEWITT LCT 1040
LEWITT LCT 1040
LEWITT LCT 1040
LEWITT LCT 1040
LEWITT LCT 1040
LEWITT LCT 1040
LEWITT LCT 1040

LEWITT

LEWITT LCT 1040

Sale price€3.062,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 59312
Quantity:
Delivery within 1-2 weeks

Contact

LEWITT LCT 1040 is LEWITT's flagship microphone system: a large-diaphragm condenser microphone with an E88CC/6DJ8 tube and a parallel FET circuit, four all-analog tube characteristics, seamlessly blendable polar patterns, and a detachable remote controller. The system comprises the microphone, an external PSU, and a remote unit – every sonic parameter is accessible from the engineer's sweet spot without interrupting the session. Winner of the Sound on Sound 2023 Best Microphone award. 10-year manufacturer warranty.

Four Tube Characters + FET – a Tonal Palette in One Microphone

The heart of the LCT 1040 is an E88CC/6DJ8 tube operating in four distinct analog modes: Clear (tube at technical optimum – warm and transparent), Warm (smooth, pleasant high-end), Dark (tamed highs for bright sources or vocalists), and Saturated (rich harmonics with subtle compression). Each characteristic is a physically different tube bias point – not digital processing, not simulation. The Circuit knob on the remote smoothly blends the FET circuit into the tube signal at any ratio. The Mix output delivers the set blend; the FET output delivers 100% pure FET independently of the Circuit control, enabling simultaneous recording of both paths and deferring the blend decision to post-production. Self-noise: 10 dB(A) FET, 13 dB(A) tube; maximum SPL 137 dBSPL (FET at 0 dB pad) and an incomprehensible 161 dBSPL with the –24 dB pad engaged.

Remote Controller and Large-Studio Workflow

The remote undocks from the PSU and connects to it via a standard 3-pin XLR cable. With the microphone placed in the live room, the engineer has full control over tube character, FET/Tube blend, polar pattern, PAD, and low-cut filter from the console position – without entering the booth or interrupting the take. The polar pattern transitions seamlessly between omni and figure-8 with no switching noise. The Default/Reverse flip switch changes which side of the microphone is acoustically active without physically rotating the mic on the stand. The carbon fiber shockmount allows 360° rotation of the microphone and features quick-release mechanisms for both the microphone and the angle adjustment. Two Neutrik XLR outputs: Mix and FET. The 10-pin Hirose 5 m system cable is included.

KEY FEATURES

  • E88CC/6DJ8 tube – 4 all-analog characteristics: Clear, Warm, Dark, Saturated
  • Continuous FET/Tube blend via Circuit control
  • Two Neutrik XLR outputs: Mix (FET+tube blend) and FET (100% pure FET)
  • Seamless polar pattern: omni / wide cardioid / cardioid / supercardioid / figure-8
  • Default/Reverse flip switch – changes active front without repositioning the microphone
  • Detachable remote controller – full parameter control from the engineer's sweet spot via 3-pin XLR
  • PAD: –6 / –12 / –24 dB (maximum SPL with –24 dB pad: 161 dBSPL)
  • Low-cut filter: linear / 40 Hz (12 dB/oct) / 80 Hz (12 dB/oct) / 120 Hz (6 dB/oct)
  • Carbon fiber shockmount – 360° rotation, quick-release for mic and angle adjustment
  • Dual-layer magnetic pop filter integrated with the shockmount
  • 10-year manufacturer warranty
  • Includes: shockmount, pop filter, windscreen, 10-pin 5 m cable, mic mount, mil-spec transport case

TECHNICAL SPECIFICATIONS

  • Transducer type: condenser, externally polarized
  • Tube: E88CC / 6DJ8 (JJ Electronics)
  • Polar patterns: omni / wide cardioid / cardioid / supercardioid / figure-8 (seamless blend)
  • Frequency range: 20 Hz – 20,000 Hz
  • Sensitivity: 17.2 mV/Pa (–35.3 dBV/Pa) cardioid
  • Self-noise: 10 dB(A) FET / 13 dB(A) tube (cardioid)
  • Maximum SPL (0.5% THD): 137 dBSPL (FET, 0 dB pad) / 161 dBSPL (with –24 dB pad)
  • Signal-to-noise ratio: 84 dB(A) FET / 81 dB(A) tube
  • Dynamic range: 126.7 dB(A) FET
  • Output impedance: 83.8 Ω
  • Attenuation pad: 0 / –6 / –12 / –24 dB
  • Low-cut filter: linear / 40 Hz (12 dB/oct) / 80 Hz (12 dB/oct) / 120 Hz (6 dB/oct)
  • Mic-to-PSU connector: 10-pin Hirose (5 m cable included)
  • Audio outputs: 2 × Neutrik XLR (Mix + FET)
  • Microphone enclosure: zinc die cast
  • Microphone dimensions: 196 × 65 × 45 mm (7.7" × 2.6" × 1.8")
  • Microphone weight: 652 g (23 oz)
  • PSU dimensions: 240 × 170 × 47 mm
  • PSU weight: 2,381 g
  • Remote dimensions: 240 × 163 × 52 mm
  • Remote weight: 1,952 g

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Accessories and matching products

SSQ POP1
SSQ POP1€13,00