Klotz GRG1MP01.5

Klotz GRG1MP01.5 is a 1.5 metre balanced cable from the GREYHOUND series with a male XLR and a balanced 6.3 mm jack. The short length is intended for connections inside a rack and on a desk.

A tidy rack instead of a coil of surplus cable

Using a three metre cable between two units half a metre apart leaves a coil behind the rack that collects hum and blocks access to the connectors. One and a half metres is enough to link an interface to a processor, or a mixer output to a recorder, without leaving slack to stuff away.

The same conductor as the longer runs

A shorter cable does not mean cheaper parts: the 99.95 percent copper conductor, the spiral shield and the metal connectors are identical across the series. Nickel-plated contacts and the PVC jacket handle repeated re-patching, so the cable also suits location work where connections change several times a day.

KEY FEATURES

• Balanced cable, male XLR to 6.3 mm TRS jack
• Copper of 99.95 percent purity
• Spiral shield along the full length
• Metal XLR and jack connectors from the current GREYHOUND series
• Nickel-plated contacts
• Flexible PVC jacket that survives repeated coiling
• Shorter connector sleeve for a better grip

TECHNICAL SPECIFICATIONS

• Type: balanced audio cable
• Length: 1.5 m
• Conductor: 2 x 0.22 mm squared (AWG 24)
• Conductor material: copper of 99.95 percent purity
• Shielding: spiral shield
• Jacket: PVC
• Outer diameter: 6 mm
• Connector 1: 3-pin male XLR, nickel-plated metal shell
• Connector 2: 6.3 mm balanced jack, 3-pole, straight, black metal shell
• Contacts: nickel plated
• Colour: black