Kali Audio LP-UNF-WH

Kali Audio LP-UNF-WH — a pair of ultra-nearfield 4.5-inch studio monitors in a white finish, with a 1-inch tweeter, built for listening from as close as 0.8 m, with USB-C, Bluetooth, TRS, and RCA inputs.

The LP-UNF-WH is a white color variant of the LP-UNF — same electronics and acoustics, different cabinet finish. Both units are bi-amped, 40 W for the HF section and 40 W for LF/MR each, for 160 W total, linked by a dedicated interconnect cable. Frequency response spans 39 Hz - 25 kHz (-10 dB), narrowing to 54 Hz - 21 kHz within ±3 dB, with a max SPL of 103 dB and THD under 2% from 65-1000 Hz. The tweeter and 3D waveguide come straight from the LP-6 line, which is unusual at this cabinet size.

Full-range monitoring on a tight desk

A standard nearfield pair needs a listening distance of roughly 1-1.5 m for the stereo image to lock in properly — often impossible on a small desk. The LP-UNF-WH is built for arm's-length listening distances, treating the desk itself as an acoustic element of the system: reflections from the driver to the desk to the ears are accounted for in the factory tuning, so stereo imaging and element placement stay legible even that close. A front-firing port shaped using fluid dynamics principles lets you place the monitors near a wall without boomy low-end buildup.

A white finish for a lighter workstation

Black is the default finish, but it doesn't always suit a lighter desk setup, a white monitor screen, or a white MIDI keyboard. The LP-UNF-WH keeps every acoustic parameter of the base model, changing only the cabinet color to white. USB-C and Bluetooth 5.1 inputs also let you connect directly from a phone or tablet without an audio interface in between, and Boundary EQ via DIP switches tunes the low-frequency response for the specific placement on a desk, on stands, or near a wall. A touch-sensitive volume slider on the right speaker lets you adjust level without reaching for a separate controller.

KEY FEATURES

• High-excursion 4.5-inch woofer and 1-inch tweeter in the same 3D waveguide as the LP-6
• White cabinet finish
• Both units bi-amped, 160 W total (Class D)
• USB-C (24-bit/48kHz), Bluetooth 5.1, TRS, and RCA inputs
• Boundary EQ plus LF/HF trim (±2 dB) via DIP switches
• Touch-sensitive volume slider on the right speaker
• Low-noise front-firing port eliminating chuffing

TECHNICAL SPECIFICATIONS

• Configuration: 2-way, active, bi-amped (pair)
• Drivers: 4.5-inch woofer, 1-inch tweeter
• Power: 160 W total (bi-amped, Class D)
• Frequency response: 39 Hz - 25 kHz (-10 dB), 54 Hz - 21 kHz (+/-3 dB)
• Crossover: 1950 Hz
• Max SPL: 103 dB
• THD: under 2% (65-1000 Hz)
• Inputs: 2x TRS (+4 dBu), 2x RCA (-10 dBV), USB-C, Bluetooth
• Color: white
• Included: 24 VDC power supply, interconnect cable