Kali Audio LP-6W V2-EU

Kali Audio LP-6W V2-EU — an active 2-way nearfield studio monitor in a white cabinet, with a 6.5-inch woofer and 1-inch dome tweeter, tuned with switchable EQ for different placements in the room.

The LP-6W V2 is the white-finish version of the second-generation LP-6 V2 from the Lone Pine series — same electronics and acoustic design, only the cabinet finish differs. The updated Class D amplifier platform cuts self-noise by 12 dB compared to the first generation and adds 3 dB of extra headroom. The bi-amped design splits 80 W of power across two independent channels — 40 W for the low-frequency section and 40 W for the high-frequency section. Frequency response falls within 39 Hz - 25 kHz (-10 dB), with a max SPL of 112-115 dB depending on the measurement, giving solid headroom for desktop or stand-mounted use.

A white cabinet that doesn't disappear into the rack

A studio client notices monitors that break from the standard black lineup right away. The LP-6W V2 keeps every acoustic parameter of the base LP-6 V2 — the same lightened paper-cone woofer, the same textile dome tweeter, the same 3D imaging waveguide — changing only the MDF finish to white vinyl. Useful in rooms with a lighter interior scheme, or wherever the look of the setup matters when presenting work to a client.

EQ correction for real-world placement

Where a monitor sits — on a stand, against a wall, or on a desk — changes the low-frequency response and masks detail in the mix. The LP-6W V2 addresses this with eight DIP switches: three control Boundary EQ presets (free space, on stands next to a wall, meter bridge, on a desk away from a wall, on a desk next to a wall, Studio Desk), two more handle LF trim, two handle HF trim (each ±2 dB), and the last one switches the RCA input on or off to cut interference when it's not in use.

KEY FEATURES

• 6.5-inch paper woofer and 1-inch textile dome tweeter in a 3D imaging waveguide
• Bi-amped Class D amplification on the low-noise 2nd Wave platform
• White MDF cabinet finish
• 6 preset Boundary EQ settings matched to speaker placement
• LF and HF trim controls (-2 dB, 0 dB, +2 dB)
• Low-noise front port tube that eliminates chuffing
• XLR, TRS, and RCA inputs with switchable RCA input

TECHNICAL SPECIFICATIONS

• Configuration: 2-way, active, bi-amped
• Drivers: 6.5-inch woofer, 1-inch dome tweeter
• Power: 40 W (LF), 40 W (HF), 80 W total
• Frequency response: 39 Hz - 25 kHz (-10 dB), 47 Hz - 21 kHz (+/-3 dB)
• Crossover: 1.5 kHz
• Max SPL: 112-115 dB (depending on measurement)
• Inputs: 1x TRS, 1x XLR, 1x RCA
• Input sensitivity: +4 dBu (TRS/XLR), -10 dBV (RCA)
• Enclosure: front-ported bass reflex, white finish
• Dimensions: 35.9 x 22.2 x 26 cm (14.125 x 8.75 x 10.25 in)
• Weight: 7 kg (15.5 lbs)