
IK Multimedia
IK Multimedia AXE I/O Guitar Audio Interface
Choose options
IK Multimedia AXE I/O is a 2-in/5-out audio interface for guitarists, with a Z-TONE circuit that adapts the input impedance, a dedicated Amp Out for re-amping and 24-bit conversion up to 192 kHz. It has two XLR/TRS combo inputs, instrument inputs on the front panel, MIDI I/O and AmpliTube integration with preset recall. Talk through your guitar recording chain with us in our Warsaw showroom.
Guitar tone depends on how the pickup is loaded
The same guitar sounds different into a 1 MOhm input than into a pedal or an amp, because the load changes the pickup's frequency response and resonance. Z-TONE varies the input impedance in PASSIVE mode from 1 MOhm down to 2.2 kOhm, and in ACTIVE mode, for guitars with onboard electronics, sets it to 10 kOhm. You choose between two preamp topologies with a switch: PURE (THD 0.0015 percent) for a clean signal and JFET (THD 0.5 percent) for a warmer, more saturated character.
Re-amping while you record the dry signal
The Amp Out (output 5) sends your guitar to a real amplifier while the computer records a dry track for later re-amping. The output has a ground lift switch to cure ground-loop hum. The front panel carries a tuner with a display, gain knobs with meters, headphone level and an encoder for choosing AmpliTube presets.
KEY FEATURES
- 2-in/5-out interface, 24-bit conversion up to 192 kHz
- Z-TONE: adjustable instrument input impedance
- Switchable PURE and JFET preamp topologies
- Two XLR/TRS combo inputs with Class-A preamps, +48 V phantom power
- Amp Out for re-amping with ground lift
- MIDI In/Out, front-panel tuner, encoder for AmpliTube presets
- Metal enclosure, DC power supply included
TECHNICAL SPECIFICATIONS
- Conversion: 24-bit A/D and D/A, 44.1 to 192 kHz
- Outputs 1-2 (monitor): balanced, max +21 dBu, 116 dB(A) dynamic range, THD+N -106 dB(A)
- Outputs 3-4: unbalanced, max +16 dBu, 115 dB(A) dynamic range
- Output 5 (Amp Out): unbalanced, floating, 0 dBFS equals -6 dBu, ground lift
- Headphone output: approx. 180 mW into 50 Ohm, 112 dB(A) dynamic range
- Mic inputs 1-2: Class-A discrete preamp, 4 kOhm impedance, 116 dB(A) dynamic range
- Instrument input 1: impedance from 1 MOhm down to 2.2 kOhm (PASSIVE) or 10 kOhm (ACTIVE)
- Instrument input 2: Hi-Z 1 MOhm
- Connections: USB 2.0 Type B, MIDI I/O 5-pin DIN, 2 TRS controller inputs, DC IN
- Dimensions: 23.8 x 21.1 x 5.3 cm / 9.37 x 8.31 x 2.09 in; weight: 1.3 kg / 2.9 lb
- Compatibility: Mac and PC, 64-bit application (macOS 10.11 or later)
- Included: AXE I/O, 1.5 m USB-A to USB-B cable, DC power supply


