HUM Audio N-TROPHY (Analog Console (8-channel Section))
HUM Audio N-TROPHY (Analog Console (8-channel Section))

HUM Audio

HUM Audio N-TROPHY (Analog Console (8-channel Section))

Sale price€31.100,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 58403
Quantity:
Delivery within 6-8 weeks

Contact

HUM Audio N-TROPHY (Analog Console — 8-Channel Section) is the eight-channel in-line module of the N-TROPHY console — the fundamental building block of the system, available as a standalone purchase for expanding an existing console or as the starting point for a new setup. Each 8-channel section adds 57 cm to the console's width and contains eight complete channel strips with the same full processor chain found in any N-TROPHY configuration: discrete Class-A preamp based on Jensen JE990 opamps (topology similar to the flagship RP-2 preamp, up to 66 dB gain), switchable input transformer, THD stage with five saturation types, tube optical compressor on NOS Mullard tubes, a 6-band passive EQ, and an insert matrix. Modular sections can be joined in any order and purchased individually, without requiring a new console purchase.

Channel architecture — preamp, THD, tube compressor, passive EQ

The mic/line/tape preamp based on Jensen JE990 opamps delivers up to 66 dB of gain with an optional switchable input audio transformer offering five coloration types: German, Silicon (asymmetrical), and Soft/Mid/Hard (symmetrical). The THD stage — an original HUM Audio design — adds harmonics deliberately, with adjustable intensity and saturation character; Soft mode is particularly suited to analog tape simulation. The per-channel tube optical compressor on NOS Mullard tubes offers continuously adjustable characteristics from slow, gluey optical-style compression (LA-2A type) to fast, FET-style limiting (1176-type), with an HPF in the detection circuit, external KEY input, and stereo link. The 6-band passive EQ with HPF and LPF on rotary switches provides full recallability and perfect matching between channels. Processor order (compressor/EQ/insert) is freely configurable per channel. The insert loop with a Dry/Wet Blend control enables parallel processing with any external unit. Each channel uses a 100mm stepped motorized fader built on fixed resistors — a unique HUM Audio design that eliminates the matching and repeatability limitations of conventional analog faders.

Routing, aux, sidechain, and DAW integration

Channel strips are 7 cm wide — wider than most large-format consoles — with solid machined aluminum knobs and custom fader caps. Each channel includes a rotary B Fader with Pan and Level controls, fader flip capability, and routing to Group 1/2 or the Main MIX Bus; a PAN MODE switch (L‹PAN›R) allows hard-panning for absolute stereo separation beyond what a standard pan pot provides. Routing to Main MIX Bus and four group pairs (eight mono group buses) with SOLO SAFE and MUTE. Eight mono aux sends pre- or post-fader per channel; AUX 7 and AUX 8 function as global sidechain buses for all channel compressors and the master compressor — key signals from different channels and groups can be mixed freely for unlimited creative compression configurations. Fader A controls the corresponding DAW fader when selected in Center Section's Automation Setup; the N-TROPHY fader scale matches Pro Tools exactly. The 3U rack power supply is passively cooled — one unit powers up to 32 channel strips; larger configurations require two units. Tube compressors can be powered off independently, conserving energy and extending tube life.

KEY FEATURES

  • 8 complete in-line channel strips — adds 57 cm to the console width
  • Discrete Class-A preamp on Jensen JE990 opamps — up to 66 dB gain
  • Inputs per channel: Mic (XLR), Tape (XLR), Line (XLR/Jack), Insert Return (XLR)
  • Outputs per channel: Insert Send (XLR), Direct Out (XLR)
  • Switchable input audio transformer — 5 coloration types (German, Silicon, Soft/Mid/Hard)
  • THD Stage — 5 harmonic saturation types with adjustable intensity
  • Tube optical compressor (NOS Mullard) — LA-2A to FET/1176-type with HPF, KEY, stereo link
  • 6-band passive EQ + HPF/LPF on rotary switches (full recallability, perfect channel matching)
  • Insert with Dry/Wet Blend — parallel processing with any external unit
  • Configurable processor order: compressor/EQ/insert
  • 100mm stepped motorized fader on fixed resistors (unique HUM Audio design)
  • Rotary B Fader with Pan, Level, and flip to Fader A
  • PAN MODE switch (L‹PAN›R) — hard-pan for absolute stereo separation
  • Routing to Main MIX Bus and 4 group pairs (8 mono groups)
  • 8 mono aux sends pre/post-fader; AUX 7+8 as sidechain buses for all compressors
  • Moving fader DAW automation (fader scale = Pro Tools)
  • Tube compressors independently switchable — power saving, extended tube life
  • Sections orderable and expandable individually; joinable in any order
  • Production: hand-built, Poland

TECHNICAL SPECIFICATIONS

  • Type: 8-channel in-line module for N-TROPHY console
  • Preamp: discrete Class-A, Jensen JE990 opamps, up to 66 dB gain
  • Inputs per channel: Mic In XLR, Tape In XLR, Line In XLR/Jack, Insert Return XLR
  • Outputs per channel: Insert Send XLR, Direct Out XLR
  • Input transformer: switchable, 5 coloration types
  • THD Stage: 5 harmonic saturation types
  • Compressor: tube optical, NOS Mullard, slow/gluey to fast/FET-type
  • EQ: 6-band passive + HPF/LPF on rotary switches
  • Insert: external with Dry/Wet Blend
  • Fader: 100mm stepped motorized (fixed resistors)
  • Aux sends: 8 mono pre/post-fader per channel
  • Routing: Main MIX Bus + 4 group pairs (8 mono groups)
  • Channel strip width: 7 cm
  • 8-channel section width addition: 57 cm
  • Power: +/-24V, passively cooled 3U rack PSU (1 unit powers up to 32 channels)
  • Production: hand-built, Poland

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.