HUM Audio ARM-1S Mic
HUM Audio ARM-1S Mic

HUM Audio

HUM Audio ARM-1S Mic

Sale price€2.731,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 58394
Quantity:
Delivery within 6-8 weeks

Contact

HUM Audio ARM-1S is a phantom-powered active ribbon microphone with a 1-inch (25.4 mm) aluminum ribbon element, 1.8 microns thick — the shorter-ribbon variant of the ARM-1 line, distinguished from the ARM-1L (2-inch ribbon, blue suspension details) by white suspension spider details. Fully discrete active electronics on 48V phantom power deliver -39 dB sensitivity (1 mV/Pa) — at condenser microphone levels — eliminating the insufficient gain and impedance matching problems typical of passive ribbon designs. The shorter ribbon of the ARM-1S produces a more neutral, tonally balanced character compared to the ARM-1L, making it the preferred choice when accurate, flat response without tonal coloration is required. Hand-built in Poland, reviewed in Sound On Sound.

Short ribbon — neutral, tonally balanced character

The shorter ribbon element (1 inch vs 2 inches in the ARM-1L) results in a slightly higher low-frequency boundary (40 Hz vs 30 Hz in the ARM-1L) and a flatter, more neutral tonal character without the emphasized low end and midrange presence of the longer ribbon. Sound On Sound describes the ARM-1S as smoother and tonally balanced — in drum room applications it gave a natural, flat representation of the kit in the room without accentuating any frequency range. An internal transducer shockmount isolates the ribbon element from mechanically transmitted vibrations; an additional external spider shockmount completes the isolation — a dual anti-vibration system. The ribbon element is shielded with copper. A three-position HPF switch (OFF / 100 Hz / 50 Hz, 6 dB/oct) located at the XLR connector base allows proximity effect control without an external equalizer. Active electronics provide a low 22-ohm output impedance — the microphone works with any preamplifier without impedance matching considerations.

Applications and comparison with ARM-1L

The ARM-1S is particularly suited to string sections, piano, woodwinds, acoustic guitar, vocals, drum overheads, and ambient recording, where accurate, natural character without frequency emphasis is required. The ARM-1L with its 2-inch copper-shielded ribbon has a fuller low end and slightly more presence in the upper-mids (6–10 kHz) — preferred for electric guitars, brass, and sources where more pronounced tonal contouring is desirable. Both models share an identical body (286.5 mm length, 60 mm diameter), the same active electronics, the same HPF circuit, and the same spider mount. The only difference is ribbon length and tonal character. The microphone ships with an external spider shockmount, a mic head dust protection cover, and a flight case.

KEY FEATURES

  • Phantom-powered active ribbon microphone with 1-inch (25.4 mm) 1.8-micron aluminum ribbon
  • Discrete active electronics — -39 dB sensitivity (1 mV/Pa), condenser microphone output level
  • Short ribbon = neutral, tonally balanced character without coloration (vs ARM-1L: more contoured)
  • Frequency response: 40 Hz – 14 kHz +/- 3 dB
  • Maximum SPL: 138 dB
  • 22-ohm output impedance — works with any preamp without impedance matching
  • Switchable HPF (3 positions): OFF / 100 Hz / 50 Hz, 6 dB/oct — at XLR connector base
  • Dual anti-vibration system: internal shockmount + external spider
  • Phantom power 48V +/-5V
  • Gold-plated XLR connector
  • Identical body to ARM-1L — difference only in ribbon length and detail color (white vs blue)
  • Applications: strings, piano, woodwinds, acoustic guitar, vocals, drum overheads, ambience
  • Included: ARM-1S microphone, external spider shockmount, mic head dust cover, flight case
  • Hand-built in Poland; 2-year warranty

TECHNICAL SPECIFICATIONS

  • Acoustic operating principle: electrodynamic pressure gradient with active electronics (phantom)
  • Polar pattern: figure-8
  • Generating element: 1-inch (25.4 mm) aluminum ribbon, 1.8 microns thick
  • Frequency response: 40 Hz – 14 kHz +/- 3 dB
  • Sensitivity: -39 dB re. 1V/Pa (1 mV/Pa)
  • Maximum SPL: 138 dB
  • Output impedance: 22 ohms (electronic)
  • Recommended load impedance: 150 ohms or greater
  • HPF: 50 Hz and 100 Hz, 6 dB/oct, switchable (OFF/100 Hz/50 Hz)
  • Power: phantom +48V +/-5V
  • Anti-vibration system: dual (internal + external spider)
  • Body length: 286.5 mm
  • Body diameter: 60 mm (upper)
  • Spider external diameter: 126 mm
  • Flight case dimensions: 320 x 230 x 155 mm
  • Finish: matte grey with white details (distinguishes from ARM-1L: blue details)
  • Included: ARM-1S microphone, spider shockmount, mic head dust cover, flight case

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.