Fostex ET-TH4.4BL2Y Cable

FOSTEX

Fostex ET-TH4.4BL2Y Cable

Sale price€363,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 59519
Quantity:
This item is available on a custom order basis only

Contact

Fostex ET-TH4.4BL2Y is an optional balanced Y-cable with a 7N-grade OFC conductor, designed for the TH910, TH919, TH1000RPmk2, and TH1100RPmk2. It terminates in a 4.4 mm TRRRS (5-pole Pentaconn) plug at the amplifier end and two independent 3.5 mm TS plugs at the earcup end — the same dual-connector topology as the stock unbalanced ET-TH2.0UB2Y, implemented here in a fully balanced signal path. The jacket is flexible PVC, the length is 2.0 m, matching the factory cable.

What balanced operation actually delivers with these headphones

The TH910 and TH919 run at 25 Ω; the TH1000RPmk2 and TH1100RPmk2 at 32 Ω — both impedances sit squarely in the operating range of reference-class balanced headphone amplifiers with 4.4 mm Pentaconn outputs, which have become the de facto standard in hi-end portable and desktop DAC/amp units since adoption by Sony, Astell&Kern, and others. A balanced signal path eliminates common-mode noise induced by a shared ground return, which at the impedance levels of these headphones translates to improved channel separation and lower in-band noise floor on high-resolution source material. The two independent 3.5 mm TS plugs at the earcup end ensure each channel has a fully isolated signal path with no shared ground at the split point.

7N OFC and signal path consistency

Fostex specifies 7N-grade OFC — 99.99999% purity copper — for both the internal wiring of the TH910/TH919 and the supplied stock cables. Using the same conductor grade in the ET-TH4.4BL2Y keeps the external cable electrically consistent with the internal signal path. At the impedance levels of these headphones, any increase in conductor resistance from impurities is audible as a slight reduction in damping factor. Gold-plated connectors at both ends protect contact surfaces from oxidation under normal studio and listening conditions.

KEY FEATURES

  • 4.4 mm 5-pole balanced Pentaconn (TRRRS) connector — fully balanced signal path
  • Two independent 3.5 mm TS earcup plugs — isolated channel connections, no shared ground at split
  • 7N-grade OFC conductor (99.99999% purity) — matched to TH910/TH919 internal wiring spec
  • Gold-plated connectors — corrosion resistance and reliable electrical contact
  • Flexible PVC jacket — consistent handling in studio and desktop environments
  • Compatible with: TH910, TH919, TH1000RPmk2, TH1100RPmk2, TH810, TH818
  • Length: 2.0 m

TECHNICAL SPECIFICATIONS

  • Model: ET-TH4.4BL2Y
  • Type: Balanced, Y-cable
  • Source connector: 4.4 mm TRRRS (5-pole Pentaconn), gold-plated
  • Headphone connectors: 2x 3.5 mm TS (mono), gold-plated
  • Conductor: 7N-grade OFC (99.99999% purity)
  • Jacket: Flexible PVC
  • Length: 2.0 m
  • Compatible models: TH910, TH919, TH1000RPmk2, TH1100RPmk2, TH810, TH818

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.