Fostex ET-TH4.4BL Cable

FOSTEX

Fostex ET-TH4.4BL Cable

Sale price€363,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 59490
Quantity:
This item is available on a custom order basis only

Contact

Fostex ET-TH4.4BL is an optional balanced cable for TH-series headphones with 2-pin bayonet earcup connectors — compatible with the TH909, TH900mk2, TH610, and TH616. It runs from a 4.4 mm TRRRS (5-pole Pentaconn) plug at the amplifier end to two separate 2-pin bayonet connectors at the earcup end — the same locking system used by the factory cables ET-H3.0N7UB and ET-H3.0N7BL. The conductor is 7N-grade OFC (99.99999% purity), the jacket is flexible PVC, and the length is 2.0 m.

ET-TH4.4BL vs ET-TH4.4BL2Y — the earcup connector distinction

ET-TH4.4BL serves the older TH generation with 2-pin bayonet cup connectors: TH909, TH900mk2, TH610, and TH616. The separately listed ET-TH4.4BL2Y serves the new generation — TH910, TH919, TH1000RPmk2, TH1100RPmk2 — which uses individual 3.5 mm TS plugs per earcup. Both cables share the same 4.4 mm Pentaconn source plug and the same OFC conductor spec, but the earcup connectors are not interchangeable. Confirm the headphone generation before ordering. The balanced 4.4 mm path carries left and right channels on fully isolated conductor pairs with no shared ground return. At 25 Ω (TH909, TH900mk2) and 150 Ω (TH610/TH616), this produces a measurable improvement in channel separation and in-band noise floor compared to a single-ended connection — the difference is audible on high-resolution source material.

7N OFC and internal wiring consistency

Fostex specifies 7N-grade OFC for the internal wiring of the TH909 and TH900mk2 and for the stock ET-H3.0N7UB cable shipped with those models. The ET-TH4.4BL continues that conductor specification, changing only the source-end termination from unbalanced 6.3 mm TRS to balanced 4.4 mm Pentaconn. This keeps the external cable electrically matched to the headphone's internal signal path. Gold-plated connectors at both ends protect contact surfaces from oxidation under normal listening and studio use conditions.

KEY FEATURES

  • 4.4 mm 5-pole balanced Pentaconn (TRRRS) connector — fully balanced signal path
  • Dual 2-pin bayonet earcup connectors — compatible with TH909, TH900mk2, TH610, TH616
  • 7N-grade OFC conductor (99.99999% purity) — matched to headphone internal wiring specification
  • Gold-plated connectors at both ends — corrosion resistance and reliable electrical contact
  • Flexible PVC jacket — consistent handling during daily use
  • Length: 2.0 m

TECHNICAL SPECIFICATIONS

  • Model: ET-TH4.4BL
  • Type: Balanced cable
  • Source connector: 4.4 mm TRRRS (5-pole Pentaconn), gold-plated
  • Headphone connectors: 2x 2-pin bayonet, gold-plated
  • Conductor: 7N-grade OFC (99.99999% purity)
  • Jacket: Flexible PVC
  • Length: 2.0 m
  • Compatible models: TH909, TH900mk2, TH610, TH616

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.