Focusrite RedNet HD32R
Focusrite RedNet HD32R

FOCUSRITE

Focusrite RedNet HD32R

€2.362,71
Sold out

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 40366

Contact

Focusrite RedNet HD32R — a 1U interface bridging Pro Tools|HD and HDX systems to a Dante network through Mini DigiLink connectors, delivering full 32x32 channel I/O without changing existing Pro Tools workflow.

HD32R behaves like a standard 64-channel (32 in/32 out) break in/out box, appearing in Pro Tools exactly as any other supported interface — Dante sources and destinations are assigned to Pro Tools inputs and outputs with no new way of working to learn. Supported systems include Pro Tools|HDX, HD Native, HD Native Thunderbolt and legacy HD TDM, and up to six HD32R modules can be connected to a single HDX system to reach its maximum channel count.

Full 32-channel Pro Tools|HD I/O without giving up Dante

Each HD32R connected directly to a Mini DigiLink port on an HDX or HD card provides a full 32 inputs and outputs, bringing the entire Dante ecosystem — from RedNet to third-party analogue and digital interfaces — onto Pro Tools without swapping a computer card and without sacrificing the low latency of Pro Tools|HD cards. Where a free DigiLink port isn't available, Expansion Mode lets you connect an existing 16-channel Pro Tools|HD interface to the HD32R's expansion port, combining for a full 32 channels on a single card port.

Critical redundancy and integration with existing HD gear

Two independent power supplies with fault detection and locking IEC inlets, plus dual etherCON ports running in redundant, switched or daisy-chain mode, protect the session against signal interruption in critical-path production. Word Clock and Loop Sync on BNC connectors integrate HD32R with existing HD I/O or Sync HD I/O interfaces without an extra clock converter, and remote control and metering through RedNet Control give full visibility into the unit's status without walking over to the rack.

KEY FEATURES

  • 32x32 channels of I/O for Pro Tools|HD via Mini DigiLink (16x16 at 192 kHz)
  • Support for Pro Tools|HDX, HD Native, HD Native Thunderbolt and HD TDM
  • Up to six HD32R modules on a single HDX system
  • Expansion Mode to combine with an existing 16-channel HD interface
  • Two independent power supplies with fault detection and locking IEC inlets
  • Dual etherCON ports, redundant, switched and daisy-chain modes
  • Word Clock and Loop Sync I/O on BNC
  • Remote control and metering through RedNet Control
  • Operation up to 24-bit/192 kHz
  • Includes the Brainworx bx_console Focusrite SC plug-in

TECHNICAL SPECIFICATIONS

  • Channels: 32x32 up to 96 kHz, 16x16 at 176.4/192 kHz
  • Pro Tools connectivity: 2x Mini DigiLink, expansion port
  • Sample rates: 44.1-192 kHz, 24-bit
  • Clock sources: internal, Word Clock, Loop Sync, Dante Network Master
  • External Word Clock: ±7.5% of nominal range
  • Network: Dante, dual etherCON ports, redundant/switched/daisy-chain
  • Power: 2x internal supply with locking IEC inlet
  • Chassis: 1U, 19-inch, roadworthy
  • Software: RedNet Control
  • Warranty: 3 years

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.