elysia xpector
elysia xpector
elysia xpector

elysia

elysia xpector

€1.067,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 55318
Quantity:
This item is available on a custom order basis only

Contact

elysia xpector — a dual-channel Class-A headphone amplifier with separate engineer and artist feeds, balanced XLR speaker outputs, and zero-latency monitoring.

Built for recording studios where the engineer and the performer need two completely different headphone mixes at the same time — the engineer evaluating the full stereo mix while the artist wants a simplified, self-focused cue mix for tracking. Xpector solves this split at the hardware level, offering two independent, fully configurable headphone paths in one compact, desktop Class-A enclosure.

Two Distinct Headphone Mixes Without Extra Gear

A common problem in a recording session is that the engineer and the performer need different information in their headphones — the engineer judging overall mix balance, the artist wanting a simple cue mix with their own voice or instrument pushed up. Xpector solves this with two mirrored headphone paths carrying independent, configurable parameters for engineer and artist, with the artist side additionally equipped with a two-band shelf EQ to bring forward exactly what the performer wants to hear while tracking.

Scaling a Session Across Multiple Musicians Without Latency

Recording a rhythm section usually means every musician needs their own personalized mix, which with typical gear means building a complicated distribution system carrying digital latency. Xpector solves this by daisy-chaining multiple units together, each delivering a separate mix to the next musician, while keeping zero latency across the entire analog signal path. A mic preamp looped into the signal path can also feed straight into an audio interface without extra cabling.

KEY FEATURES

  • Two independent Class-A headphone amplifiers
  • Separate, configurable mixes for engineer and artist
  • Two-band shelf EQ on the artist channel
  • Zero-latency monitoring
  • Balanced XLR speaker outputs
  • Daisy-chainable across multiple units
  • Ultra-low noise floor via internal power supply
  • Direct and DAW inputs/outputs for signal loop-through
  • Compact desktop aluminum housing (not compatible with 500 series rack)
  • Manufactured in Germany

TECHNICAL SPECIFICATIONS

  • Type: dual headphone amplifier and monitor controller, Class-A
  • Frequency response: below 10Hz - 400kHz (-3.0dB)
  • Input level: +22dBu
  • Output level (XLR): +22dBu
  • Input impedance: 45kΩ
  • Output impedance: 0.09Ω
  • Max output power: 2 x 150mW (RMS)
  • Line inputs: 2 x 6.3mm jack
  • Line outputs: 2 x 6.3mm jack
  • Direct inputs/outputs: 2 x 6.3mm jack each
  • Monitor outputs: 2 x balanced XLR
  • Stereo headphone outputs: 2 x 6.3mm jack
  • Dimensions (W x H x D, incl. knobs): 104 x 137 x 212mm
  • Weight: 1.46 kg
  • Power consumption: 9W

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.