Dangerous Music MASTER CUTTER
Dangerous Music MASTER CUTTER

Dangerous Music

Dangerous Music MASTER CUTTER

Sale price€13.549,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 50651
Quantity:
Delivery within 8-12 weeks

Contact

Dangerous Music MASTER CUTTER — a version of the MASTER transfer console built to feed a cutting lathe, with duplicated stereo outputs and the same analog M/S matrix as the base model.

MASTER CUTTER exists because vinyl found its way back into mastering practice. A lathe needs two identical but physically separate stereo signals from the same output stage — one for the preview computer that calculates groove pitch and depth, one for the cutting head. Instead of splitting the signal externally, which easily introduces level or phase differences between the preview path and the cutting path, CUTTER delivers both copies straight from the console.

Dual stereo output for the lathe without compromise

The main output XLR connectors carry six pins instead of the standard three, so a single jack passes two identical stereo signals at once — Y-cables are included to split them into two separate paths. That solves a problem which, with standard gear, usually calls for an extra line amp or transformer splitter, with a risk of adding its own noise or a slight phase offset between the copies. On the CUTTER, both paths originate from the same point in the circuit, so what the preview computer sees is exactly what reaches the cutting head.

The M/S matrix as a vinyl-specific tool

Insert 2 carries the same audiophile-grade sum-and-difference matrix as the MASTER, which has direct practical relevance for cutting a record: excess high-frequency energy on the sides of the stereo image is a common cause of distortion and tracking problems, so de-essing or EQ applied only to the Mid signal tames vocal sibilance without touching the open, spacious top end on the sides. Stereo width control adds a further safety margin when preparing a mix for the groove, and when three inserts stop being enough, MASTER CUTTER pairs with LIAISON to expand the available insert loops from three to seven.

KEY FEATURES

  • Two identical, independent stereo outputs for the preview computer and the cutting head
  • Six-pin XLR connectors in place of the standard three, with Y-cables included to split the signal
  • Three insert loops with stepped switching
  • Analog M/S matrix on insert 2 with stereo width control
  • Reversible order of inserts 2 and 3 (Flip switch)
  • Input Monitor Offset for level-matched before/after comparisons
  • Two switchable stereo inputs
  • Integration with LIAISON expanding insert loops from three to seven
  • 2U rack chassis, hand-built in the USA

TECHNICAL SPECIFICATIONS

  • Inputs: 2 stereo, XLR connectors, +4dBu nominal
  • Outputs: 3 stereo pairs (one for monitoring), lathe feed on 6-pin XLR connectors
  • Input/output control: ±5dB in 0.5dB steps
  • Input Monitor Offset: -2 to +8dB in 0.5dB steps
  • M/S width control: -4 to +6dB in 0.5dB steps
  • Attenuator accuracy: 0.02dB (0.01dB typical)
  • Chassis: 2U rack

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.