AEA Stereo Bars & Arrays Stereo Protractor

AEA

AEA Stereo Bars & Arrays Stereo Protractor

Sale price€25,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 50961
Quantity:
Delivery within 8-12 weeks

Contact

AEA Stereo Bars & Arrays Stereo Protractor — a compact 6-inch (approx. 15 cm) stereo mounting bar with engraved angle markings at 0°, 90°, 110°, and 180°, enabling precise two-microphone placement for XY, ORTF, and close coincident stereo techniques on a single stand, supplied with three locking rings.

Setting a 90° angle between two microphone axes is intuitive — it is visually obvious. Setting 110° for ORTF is a different matter: the difference between 100° and 110° is invisible without a reference point, and an angular error translates directly into asymmetry in the stereo image between left and right channels. The Stereo Protractor solves this mechanically: engraved angle marks on the microphone mounting heads allow the exact included angle between mic axes to be set without a protractor, string line, or trial and error. TapeOp Magazine put it accurately in their review — 90° you can guess, 110° you cannot.

Compact Format for Tight Miking Situations

The 6-inch format is a deliberate design choice. The Stereo Protractor does not replace the SMP-17 or SMP-1M bars in applications requiring wide physical microphone spacing — it handles coincident and near-coincident techniques where both microphones need to be as close together as possible. Used above a point source — a solo instrument, a guitar amplifier, a drum kit in close position — where a full-metre bar would be logistically excessive. Two 5/8" threads accept clips or adapters from any microphone manufacturer, and the central stand mount point installs on a standard mic stand without additional couplers.

Techniques Covered by the Angle Markings

Four engraved reference points — 0°, 90°, 110°, 180° — cover the key coincident and near-coincident stereo techniques. 90° is XY and Blumlein (with figure-eight microphones). 110° is ORTF — a cardioid pair spaced 17 cm apart with each mic angled 55° off the central axis. 0° and 180° are reference positions for calibration and symmetry verification. The three locking rings included in the kit secure both microphone positions and the stand mount without thread play.

KEY FEATURES

  • 6" (approx. 15 cm) length — compact format for coincident and near-coincident techniques in tight miking situations.
  • Engraved angle markings: 0°, 90°, 110°, 180° — precise XY, Blumlein, and ORTF setup without measuring tools.
  • Two 5/8" microphone threads — accepts clips and adapters from all manufacturers.
  • Three locking rings — stable threaded connections without play.
  • Single-stand mounting — central mount point for standard microphone stand, no additional couplers needed.

TECHNICAL SPECIFICATIONS

  • Type: Compact stereo protractor bar
  • Length: 6" (approx. 15 cm)
  • Angle markings (engraved): 0°, 90°, 110°, 180°
  • Microphone threads: 2 × 5/8" (standard)
  • Kit contents: bar + 3 × locking ring
  • Supported stereo techniques: XY (90°), Blumlein (90°, with figure-eight mics), ORTF (110°)
  • Country of manufacture: USA (Pasadena, CA)

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

The delivery cost depends on the destination country:

  • 15 euros: Germany, Austria, Belgium, the Netherlands, Czechia, Denmark, Estonia, Latvia, Hungary, Slovakia, Croatia, Slovenia
  • 20 euros: France, Italy, Spain, Lithuania, Luxembourg, Sweden, Finland, Bulgaria, Romania
  • 25 euros: Ireland, Portugal, Greece
  • 35 euros: Cyprus, Malta

Orders over 250 EUR ship free (over 500 EUR for Cyprus and Malta). Free delivery does not apply to oversized items.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

The delivery cost depends on the destination country:

  • 15 euros: Germany, Austria, Belgium, the Netherlands, Czechia, Denmark, Estonia, Latvia, Hungary, Slovakia, Croatia, Slovenia
  • 20 euros: France, Italy, Spain, Lithuania, Luxembourg, Sweden, Finland, Bulgaria, Romania
  • 25 euros: Ireland, Portugal, Greece
  • 35 euros: Cyprus, Malta

Orders over 250 EUR ship free (over 500 EUR for Cyprus and Malta). Free delivery does not apply to oversized items.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.