AEA Stereo Bars & Arrays SMP-1M

AEA

AEA Stereo Bars & Arrays SMP-1M

Sale price€589,00

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 50980
Quantity:
Delivery within 8-12 weeks

Contact

AEA Stereo Bars & Arrays SMP-1M — a 1-meter (100 cm) anodised aluminium stereo bar with three SMP-S sliders and an AEA-CP coupler, designed for precise and repeatable microphone positioning across the full range of stereo techniques — from coincident XY and Blumlein through ORTF to wide spaced pair at full one-metre spacing.

The SMP-1M is the middle variant in the AEA SMP bar system — wider than the SMP-17 (43 cm), narrower than the SMP-1.25M (125 cm). A one-metre bar with SMP-S sliders and a centimetre-engraved scale in 2.5 cm increments covers the complete practical range of stereo techniques used in studio and orchestral recording: from tight coincident XY pairs at the centre of the bar to wide A-B configurations with 80–100 cm spacing. Sliders travel freely and lock with a thumb screw at any point — the scale zeroed at centre allows immediate symmetric spacing readout without a tape measure.

Full Stereo Technique Range on One Bar

The one-metre length covers not only standard studio configurations but also distant orchestral miking positions and instrumental ensemble coverage requiring wide horizontal spread. Three SMP-S sliders in the kit enable a centre-microphone layout — classic for A-B with outrigger or for a minimal Decca Tree on a single bar. The 17 cm ORTF spacing is marked specifically on the bar scale, removing the need to measure. The SMP-1M also functions as the standard rear arm bar for Decca Tree Regular assemblies, where two SMP-1M bars form the 2-metre rear span of the T configuration.

Modularity and System Expansion

The SMP-1M is fully compatible with every element of the AEA SMP system: SMP-S sliders, the AEA-CP coupler, Decca Tree brackets, and the SW dead-hang swivel adapter. Engineers starting with the SMP-1M can add further bars or sliders without replacing the existing assembly. The hard-anodised aluminium with engraved scale allows exact session geometry to be reproduced from a numeric notation — critical on multi-day orchestral sessions and staged album recordings where tonal consistency between days is a production requirement.

KEY FEATURES

  • 1-meter (100 cm) length — full range from coincident XY/Blumlein to A-B and spaced pair at up to 1 m spacing.
  • 3 × SMP-S slider — continuous position adjustment, individual azimuth angle setting (0°, ±30°, ±45°, ±55°), thumb-screw lock.
  • AEA-CP coupler — 5/8" mic stand mount, zero play in the connection.
  • Engraved scale in 2.5 cm increments — session-to-session geometry repeatability; dedicated ORTF spacing mark (17 cm).
  • Modular system compatibility — standard rear arm for Decca Tree Regular and Super; compatible with all AEA SMP accessories.

TECHNICAL SPECIFICATIONS

  • Bar length: 1 m (100 cm)
  • Bar width: 1" (approx. 2.5 cm), hard-anodised aluminium
  • Sliders included: 3 × SMP-S (with individual azimuth adjustment)
  • Coupler: 1 × AEA-CP
  • Mount thread: 5/8" standard microphone stand
  • Engraved scale: 2.5 cm increments, zeroed at centre; ORTF spacing mark (17 cm)
  • Slider angle markings: 0°, ±30°, ±45°, ±55° (included angles: 60°, 90°, 110°)
  • Supported stereo techniques: XY, ORTF, Blumlein, A-B / spaced pair, Mid-Side
  • Country of manufacture: USA (Pasadena, CA)

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.