The Lensys Pro sits between the Listen Professional and Clear MG Professional in Focal's studio line, sharing its driver architecture with the high-fidelity Azurys and Hadenys models but re-voiced for studio use. A 26 Ω impedance and 100 dB SPL/1 mW sensitivity at 1 kHz mean the headphones drive cleanly from an audio interface or a laptop headphone jack, no dedicated amp required. A 5 Hz–22 kHz frequency response (±3 dB) and 0.3% distortion at 1 kHz / 100 dB SPL give a solid technical foundation for critical listening.
Neutral balance with a midrange lift instead of the usual scoop
Most consumer-grade closed-backs push the top end, making a mix sound exciting but harder to judge accurately. The Lensys Pro takes the opposite approach, gently bringing forward the midrange, most noticeable around 300 Hz and extending up to roughly 1 kHz. The effect recalls reference nearfield monitors like the NS10: the headphones expose low-mid buildup, boxiness, and unwanted resonances that brighter headphones can mask. For a mixing engineer, that cuts down on the time spent switching between monitoring systems just to catch midrange problems.
Built for long sessions and working on the move
At 306g, with a lightweight magnesium yoke and 24mm memory-foam earpads, the Lensys Pro addresses the fatigue that comes with long mix or tracking sessions. The drivers sit at a slight angle inside the earcups, improving stereo imaging and making the Lensys Pro suitable for binaural work and immersive formats such as Dolby Atmos. A folding design and included carrying case handle transport between the studio and field sessions, and the two supplied cables — a 1.2m straight cable and a 3m coiled cable — cover both desk-bound mixing and more mobile use.
KEY FEATURES
- Closed-back, circumaural studio design
- 40mm aluminum-magnesium 'M'-dome drivers developed by Focal
- Slightly angled drivers for improved stereo imaging
- Neutral tonal balance with a midrange emphasis tuned for mixing
- 24mm memory-foam earpads
- Foldable design with included carrying case
- Two cables included: 1.2m straight and 3m coiled, plus a 3.5/6.35mm jack adapter
- Suited to binaural work and immersive audio production
TECHNICAL SPECIFICATIONS
- Type: closed-back, circumaural headphones
- Frequency response: 5 Hz - 22 kHz (±3 dB)
- Harmonic distortion: 0.3% @ 1 kHz / 100 dB SPL
- Impedance: 26 Ω
- Sensitivity: 100 dB SPL/1 mW @ 1 kHz
- Weight: 306 g
- Ambient noise isolation: 23 dB(A)
- Connector: 3.5mm mini-jack at the base of the left earcup
