Solton CL 15 Sub is a passive, flyable bass-reflex subwoofer built as the low-frequency element paired with CL 6 line array modules in a single, unified cluster. A 15-inch driver with a 3-inch voice coil handles 500 W continuous and up to 2000 W peak power, reaching a maximum peak SPL of 131 dB while staying in a compact 15 mm birch plywood enclosure. A 40-200 Hz response within 3 dB covers the low-frequency range typically needed to support the upper section of the system.
A Bass Section Integrated Into the Line Array Cluster
With built-in rigging hardware and compatibility with the FLC 6-15 frame, the CL 15 Sub can be flown directly beneath CL 6 modules, building one compact cluster that covers both low-frequency and mid-high sections without ground-stacking separate subwoofers. That setup cuts rigging time and helps maintain consistent geometry across the whole system through repeated setup and teardown on tour.
Straightforward Integration Into the Rest of the System
An 8 ohm nominal impedance and NL4 Speakon connectors make it easy to run the subwoofer from the same amplifier channel as the rest of the system, and the crossover between the CL 15 Sub and CL 6 modules is handled actively, allowing the handoff point to be dialed in for a specific cluster configuration. Two side handles make the 31 kg cabinet easier to move during load-in and load-out, and the black, durable-coated enclosure holds up to frequent touring use.
KEY FEATURES
- Passive, flyable bass-reflex subwoofer
- Low-frequency element compatible with CL 6
- 15-inch driver with a 3-inch voice coil
- Maximum peak SPL of 131 dB
- Built-in rigging hardware, ready for the FLC 6-15 frame
- Two side handles for easier transport
- NL4 Speakon connectors
TECHNICAL SPECIFICATIONS
- Type: passive, flyable bass-reflex subwoofer, line array element
- Frequency range (-10 dB): 35 Hz to 250 Hz
- Frequency response (+/-3 dB): 40 Hz to 200 Hz
- Coverage pattern: omnidirectional
- Power handling: 500 W continuous, 2000 W peak
- System sensitivity (1W/1m): 98 dB
- Maximum SPL (at 1m): 125 dB continuous, 131 dB peak
- LF driver: 15-inch, 3-inch voice coil
- Nominal impedance: 8 Ohm
- Crossover: active
- Connectors: 2x NL4, pins 1+/1-
- Enclosure: 15 mm birch plywood, black
- Dimensions (WxHxD): 650 x 460 x 530 mm
- Weight: 31 kg
