Solton 15 CX-F is a two-way horn-loaded coaxial loudspeaker built for applications that demand wide directivity control and strong weather resistance in a compact enclosure. A 2.5-inch compression driver with a 1.4-inch exit couples to a large constant-directivity 90° H x 70° V horn, while a horn-loaded 15-inch low-frequency driver sits behind the HF horn. A two-layer fibreglass coating rated IP55 lets the cabinet run outdoors without a separate protective housing.
Stable Directivity Control for Stadium Coverage
The 90° H x 70° V horn delivers wide, predictable coverage over medium and long throws, which matters when covering march routes or stadium seating where consistent level across sectors defines listening quality. An extended crossover with HF driver protection guards the compression driver against overload at the full 800 W rating, and a 101 dB sensitivity with a 136 dB peak maximum SPL provide the headroom needed to cover large areas from a single cabinet.
Ready for Fixed Installation Without Extra Hardware
The included U bracket lets the cabinet be flown as part of a fixed stadium or venue installation without ordering separate rigging hardware, and nine M8 points plus two M10 points give flexibility across different mounting configurations. A galvanized grille backed with weather-resistant fabric protects the drivers from the elements, and paired with an HD 181 Sub, A 218, or A 118 Sub subwoofer the cabinet builds a simple, cost-efficient system for mobile applications too.
KEY FEATURES
- Two-way horn-loaded coaxial loudspeaker design
- 2.5-inch compression driver with 1.4-inch exit
- Constant-directivity 90° H x 70° V horn
- Horn-loaded 15-inch low-frequency driver with weather-resistant coating
- Two-layer fibreglass coating rated IP55
- U bracket included, ready for fixed installation
- Advanced crossover with HF driver protection
TECHNICAL SPECIFICATIONS
- Type: 15-inch, two-way, horn-loaded coaxial, weather protected
- Frequency range (-10 dB): 60 Hz to 20 kHz
- Frequency response (+/-3 dB): 65 Hz to 18 kHz
- Coverage pattern: H 90° x V 70° nominal
- Power handling: 800 W continuous, 3200 W peak
- System sensitivity (1W/1m): 101 dB
- Maximum SPL (at 1m): 130 dB continuous, 136 dB peak
- HF driver: 2.5-inch voice coil, 1.4-inch exit
- LF driver: 15-inch, 3-inch voice coil, weather-resistant coating
- Nominal impedance: 8 Ohm
- Crossover frequency: 1.1 kHz
- Protection: PTC driver protection
- Connectors: 2x NL4, 1+/1- input, 2+/2- to sub
- Dimensions (WxHxD): 450 x 450 x 400 mm
- Weight: 26 kg
