


Samar Audio Design
Samar Audio Design MF08 Hybrid Multipattern Hybrid Ribbon and Condenser Microphone
Configurer
Samar Audio Design MF08 Hybrid Multipattern is a hybrid multipattern microphone that puts a figure-8 ribbon and a 10 mm omnidirectional condenser capsule in one body. The two sections are summed through transformers, and the continuously variable pattern has a detent at cardioid, so it is easy to recall on the next session. The design of Dr. Mark Fouxman, who worked on it for more than 20 years.
Two transducers, one phase
The omni capsule sits right next to the ribbon motor thanks to a redesigned magnet structure. The distance between their centres is so short that the corresponding frequency lies above 22 kHz, so phase anomalies in the audible band are negligible. The cardioid is formed by combining the omni signal with the inverted rear lobe of the figure 8, without the acoustic resistances typical of cardioid capsules.
The circuit carries multiple trimming devices that equalise level and sonic character from unit to unit, and the electronics run on standard 48 V phantom power. The slim body and 235 g weight make it easy to place on a boom or in a stereo pair, and the variable pattern lets you change the balance between direct sound and room without swapping the microphone.
A big sound from a small capsule
Samar describes the MF08 as balancing the precision of a small diaphragm with the huge sound of a large one. The circuit runs in class A push-pull with in-house transformers, handles up to 140 dB SPL and suits anything from orchestra to overheads. The carbon fibre body is free of resonance, and a basket without side posts limits acoustic reflections.
KEY FEATURES
- Hybrid: figure-8 ribbon and 10 mm omni condenser capsule
- Continuously variable pattern with a centre detent at cardioid
- Class A push-pull circuit, two in-house transformers
- Carbon fibre body, basket without side posts
- Phase-aligned elements at minimal distance
- Made in the USA, 5-year parts and 2-year ribbon replacement warranty
TECHNICAL SPECIFICATIONS
- Pickup pattern: continuously variable, detented cardioid
- Frequency response: 10 Hz - 30 kHz
- Max SPL: 140 dB
- Ribbon: 38 x 6.35 mm, 1.5 microns
- Condenser capsule: 10 mm
- Phantom power: 48 V
- Output impedance: 200 ohms
- Dimensions: 197 x 38 mm (7.75 x 1.5 in)
- Weight: 235 g (8.3 oz)


