RODE
RODE NT3
Configurer
RØDE NT3 – a versatile end-address 3/4-inch true condenser microphone designed for studio, stage, and location recording. Featuring a gold-sputtered externally polarized capsule with internal shock mounting, cardioid polar pattern, and ultra-low noise electronics with high RF rejection. The NT3 delivers exceptional detail across the full frequency spectrum, making it ideal for capturing drums, percussion, acoustic guitars, guitar amplifiers, piano, and vocals. Offers dual power operation via P48 phantom power or 9V battery for maximum flexibility in any recording situation.
Built with a rugged all-metal body and durable welded mesh head, the NT3 is engineered to withstand the demands of both studio and field work. The microphone incorporates a JFET impedance converter with transformerless bipolar output buffer, ensuring clean signal delivery over long cable runs with minimal noise. Its cardioid pickup pattern effectively isolates the source signal while maintaining consistent frequency response throughout the capture area. The internally shock-mounted capsule reduces handling noise and vibration transfer, making it equally suitable for handheld presentation use, stand mounting, or boompole operation.
With a maximum SPL of 140 dB and dynamic range exceeding 123 dB, the NT3 handles everything from delicate acoustic instruments to powerful drum hits with ease. The equivalent noise level of just 16 dBA ensures pristine recordings even in quiet passages. Designed and manufactured in Australia, the NT3 represents RØDE's commitment to quality and reliability, backed by an industry-leading 10-year warranty. The microphone comes complete with a padded zip pouch, foam windshield, durable stand mount clip, and thread adapter for universal stand compatibility.
KEY FEATURES
- 3/4-inch (19 mm) externally polarized true condenser capsule
- Cardioid polar pattern with consistent frequency response
- Dual power options: P48 phantom power or 9V battery operation
- Full frequency response: 20 Hz – 20 kHz
- Maximum SPL: 140 dB for high-output sources
- Equivalent noise: 16 dBA for ultra-quiet performance
- Dynamic range: >123 dB (per IEC268-15)
- Sensitivity: -39 dB re 1V/Pa (12 mV @ 94 dB SPL)
- Internal capsule shock mounting system
- JFET impedance converter with transformerless bipolar output buffer
- High immunity to RF interference
- Rugged all-metal body with satin nickel finish
- Welded and heat-treated mesh head for durability
- Battery status LED indicator
- Versatile mounting: handheld, stand, or boompole compatible
- Compatible with RØDE SM3, SM4, SM5 shockmounts and Blimp windscreen
TECHNICAL SPECIFICATIONS
- Acoustic principle: Pressure gradient
- Capsule: 0.75" (19 mm) gold-sputtered condenser
- Polar pattern: Cardioid
- Address type: End-address
- Frequency range: 20 Hz – 20 kHz
- Output impedance: 200 Ω
- Maximum SPL: 140 dB SPL (@ 1 kHz, 1% THD into 1 kΩ load)
- Maximum output level: 9.5 mV (@ 1 kHz, 1% THD into 1 kΩ load)
- Sensitivity: -39.0 dB re 1 Volt/Pascal (12.00 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
- Equivalent noise level (A-weighted): 16 dBA
- Dynamic range: >123 dB (per IEC268-15)
- Power options: 9V battery, +12V, +24V, or +48V phantom power
- Active electronics: JFET impedance converter with bipolar output buffer
- Output connection: 3-pin XLR
- Weight: 371 g (13.1 oz) without battery; 415 g with battery
- Dimensions: 206 mm (H) × 32 mm (W) × 32 mm (D)
- Body construction: Cast metal with satin nickel finish
- Mesh head: Welded and heat-treated high-strength design
- Warranty: 10 years (1 year with free extension to 10 years upon registration)
- Designed and manufactured in Australia
- Included accessories: ZP1 padded zip pouch, RM3 microphone clip, WS3 foam windshield, thread adapter (3/8" and 5/8")
