Quested
Quested V2108 Pair
This item is available on a custom order basis only
Please contact us for more details.
Nous contacterConfigurer
This item is available on a custom order basis only
Please contact us for more details.
Nous contacterThis item is available on a custom order basis only
Please contact us for more details.
Nous contacterQuested V2108 Pair is a pair of active two-way monitors built in the UK around an eight-inch bass driver and a 28 mm soft dome. Each cabinet carries its own Class A/B amplification delivering over 200 W per driver, with distortion below 0.03 percent across the band, which leaves enough dynamic headroom to work at real session levels rather than only at low listening volume.
Low end you do not have to verify on a subwoofer
The eight-inch driver reaches 45 Hz within 2 dB and 38 Hz at minus 6 dB, so bass parts, kick drums and low synth lines are judged directly instead of being inferred from upper harmonics. That removes the classic failure of mixing on small monitors: bass compression and kick tuning decided on a band the speakers never reproduce. The 1.4 kHz crossover at 24 dB per octave keeps the midrange clean and makes vocal and guitar problems easy to place in the mix.
Matching the room without a digital correction stage
Each cabinet offers four-position low-frequency EQ plus a high-frequency switch with flat and plus or minus 1 dB above 2.5 kHz. Placed near a wall or in a room with a strong bass build-up, that lets you flatten the response without inserting a processor into the signal path. The input is an electronically balanced XLR and 1/4 inch combo socket with 10 kilohm impedance and RF filtering, so the monitor tolerates long cable runs in a densely populated studio.
KEY FEATURES
- Pair of active two-way monitors for nearfield and midfield work
- 200 mm bass driver and 28 mm soft dome tweeter
- Class A/B amplification, over 200 W RMS per driver
- Distortion below 0.03 percent from 20 Hz to 20 kHz
- Four-position low-frequency EQ and three-position high-frequency switch
- Electronically balanced input with RF filters
- Designed and built by Quested Monitoring Systems
TECHNICAL SPECIFICATIONS
- Frequency response: 45 Hz to 20 kHz plus or minus 2 dB, 38 Hz to 22 kHz at minus 6 dB
- Drivers: 1 x 200 mm paper cone, 1 x 28 mm soft dome
- Power: over 200 W RMS per channel, Class A/B
- Crossover: 1.4 kHz, 24 dB per octave
- Maximum SPL: 108.5 dB continuous pink noise at 1 m, 114.5 dB peak per pair
- LF EQ: flat, minus 3 dB, minus 9 dB at 40 Hz
- HF EQ: flat, plus or minus 1 dB above 2.5 kHz
- Input: XLR and 1/4 inch jack combo, 10 kilohm, electronically balanced
- Dimensions: 340 x 400 x 365 mm (w x h x d)
- Weight: 23 kg each
