Gamechanger
Gamechanger Plus Pedal II
This item is available on a custom order basis only
Please contact us for more details.
Nous contacterConfigurer
This item is available on a custom order basis only
Please contact us for more details.
Nous contacterThis item is available on a custom order basis only
Please contact us for more details.
Nous contacterGamechanger Plus Pedal II adds piano-style sustain to any source: guitar, voice, wind, acoustic and string instruments. The new Spectral Sampling engine analyses the signal at spectral level rather than simply looping a fragment.
Layers captured without lifting your foot
On the first version of the pedal every new layer required a deliberate foot movement. Auto Layer Catch detects new note events on its own, filters out noise and stacks them, so your foot can stay on the pedal for a whole phrase. The CATCH switch decides what enters the pool: every note, only the selected number of layers, or single notes added one at a time. The LAYERS knob sets anywhere from 1 to 10 layers, or Infinite mode.
The effects loop in three places at once
A three-position switch moves external effects ahead of the pedal engine, inside the loop, or after the whole unit, without repatching a cable. A delay before the pedal builds rhythmic layers, inside the loop it treats only the sustained notes, and after the pedal it adds space to everything. A combo XLR and jack input with a studio-grade mic preamp takes a microphone directly, and a Kill Dry switch leaves only the layers at the output.
KEY FEATURES
- Spectral Sampling engine analysing the spectrum of every sound
- Auto Layer Catch: layers captured with no foot movement
- Gradual optical control of the brass pedal across its full travel
- From 1 to 10 layers, or Infinite mode
- Combo XLR and jack input with a studio-grade mic preamp
- Dual resonator and dynamic TONE control
- CATCH and HOLD switches with RISE and DECAY knobs
- Stereo effects loop with PRE, FX LOOP and POST routing
- Circular LED display showing active layers
TECHNICAL SPECIFICATIONS
- Instrument input: 1/4" unbalanced TS, combo connector
- Instrument input impedance: 1 MOhm
- Maximum input level: 5.6 Vpp
- Microphone input: balanced female XLR, combo connector
- Microphone input impedance: 22 kOhm
- Microphone gain range: up to +27 dB
- Microphone preamp: dynamic microphones only, no phantom power
- RETURN input: 1/4" unbalanced TRS, stereo, 1 MOhm
- OUT and SEND outputs: 1/4" unbalanced TRS, stereo, 100 Ohm
- FSW / DRY OUT: 1/4" TRS, also used for the external footswitch
- Digital audio: 44.1 kHz, 24 bit
- Indicator: circular 11 LED display
- USB-C: USB-MIDI and firmware updates
- Power: 9 V DC centre negative, 2.1 x 5.5 mm plug, 500 mA minimum
- Mean power consumption: 2.4 W
- Dimensions: 90 x 195 x 72 mm
- Weight: 995 g
