Solton K&M Speaker Wall Mount Kit

The bracket attaches to the wall via a large 120 x 220 mm mounting plate, and the speaker itself is hung onto the bracket's arm and secured with a locking screw, without needing to support the cabinet's full weight throughout the entire mounting process. Once mounted, the speaker can be swiveled 90° horizontally and tilted from 0° to 30°, allowing precise aiming at the audience regardless of the angle the wall itself is set at.

Permanent installation without overloading the bracket

A common problem when mounting speakers in clubs, churches, or conference rooms: undersized brackets lead to cabinet vibration and a weakened mount over time. The K&M Speaker Wall Mount carries up to 25 kg, covering most compact full-range tops and array columns used in fixed installations, and its large wall plate spreads the load across a wider mounting area rather than concentrating stress on just a few screws.

Angle adjustment after mounting, without removing the speaker

Once a speaker is permanently installed, correcting the listening angle is difficult if the sound doesn't land exactly on the audience zone — especially with a heavy cabinet mounted high up. This bracket allows the speaker to be rotated and tilted after it's already hung on the arm, thanks to its hook-and-screw mounting system, so a single technician can make the adjustment without dismantling the whole installation.

KEY FEATURES

• Wall bracket for permanent mounting of mid- to heavy-weight speakers
• Large wall plate spreading the load across a wider surface
• 90° horizontal speaker rotation
• Tilt adjustment from 0° to 30°
• Hook-and-lock screw mounting method
• Steel construction

TECHNICAL SPECIFICATIONS

• Function: speaker wall mount
• Material: steel
• Angle of inclination: 0° to 30°
• Swivel: 90°
• Maximum load capacity: 25 kg
• Wall clearance: 110 mm
• Wall plate: 120 x 220 mm
• Weight: 1.34 kg
• Color: black