Solton aart P-15 A is a self-powered two-way bi-amped loudspeaker built around a 15" Neodymium aaCRAAFT driver on a 3" voice coil and a HF compression driver with a 3" voice coil and 1.4" exit, driven by a dual-channel Class D amplifier with FIR DSP. The key distinction from the aart T-15 A+ is the PP composite (polypropylene) enclosure instead of birch plywood — at identical acoustic performance the P-15 A weighs 21 kg, a meaningful difference when transporting multiple cabinets. A dedicated rain cover (art. 12640) makes it a complete solution for outdoor events.
15" Neodymium aaCRAAFT and FIR DSP — power and phase precision in a PP enclosure
The 15" aaCRAAFT Neodymium driver on a 3" (75 mm) voice coil delivers 700 W continuous and 2800 W peak power with a bass extension to 45 Hz (-10 dB), which handles standalone operation for light programme material without a subwoofer. The HF compression driver on a 3" voice coil with a 1.4" exit horn keeps moving mass low and improves transient resolution in the presence and air range. Dual-channel DSP with FIR filtering corrects phase at the crossover transition in a way IIR filters cannot — the result is consistent phase across the full 90° x 60° coverage angle and tighter stereo imaging in pairs. Four factory DSP presets cover fullrange, MF/HF, stage monitor and installation scenarios without cable changes. Switchable Line/Mix OUT and two XLR/Jack Combo inputs with Mic/Line preamps handle zone chaining and signal monitoring from the cabinet's rear panel. PowerCon In/Out supports daisy-chain mains distribution between multiple P-15 A cabinets without power splitters. Dual-band limiters protect LF and HF drivers independently.
PP composite enclosure and rain cover — built for outdoor use
The multi-angle PP composite enclosure resists moisture, corrosion and thermal deformation far better than plywood — it does not swell after rain, does not lose shape under temperature variation and needs no refinishing after surface scratches. At 21 kg the cabinet is a one-person lift. The dedicated rain cover (art. 12640) provides full protection during rain while the cabinet is on a stand, without interrupting the event. The M20 pole socket, two side handles and two M8 insert points cover stand, wall-bracket and stack mounting. Recommended subwoofer: aart SUB 18 A.
KEY FEATURES
- Type: self-powered, 2-way bi-amp, multifunctional
- LF driver: 15" Neodymium aaCRAAFT, 3" (75 mm) voice coil
- HF driver: 3" voice coil, 1.4" exit, compression driver
- Power: 700 W continuous / 2800 W peak, Class D bi-amp
- DSP with FIR filtering + 4 factory presets
- Sensitivity: 100 dB (1 W/1 m); max. SPL: 128 dB continuous / 134 dB peak
- Coverage: 90° H x 60° V nominal
- Dual-band limiter (LF and HF independently)
- 2x Mic/Line input with preamp, switchable Line/Mix OUT
- PowerCon In/Out — daisy-chain mains
- PP composite enclosure — lightweight, moisture-resistant
- Weight: 21 kg; dimensions: 420 x 695 x 380 mm
- Rain cover (art. 12640); recommended sub: aart SUB 18 A
TECHNICAL SPECIFICATIONS
- Art. No.: 13106
- Type: self-powered, two-way bi-amped, multifunctional
- LF driver: 15" Neodymium aaCRAAFT, 3" (75 mm) voice coil
- HF driver: 3" voice coil, 1.4" exit, compression driver
- Crossover: active DSP with FIR filtering
- Power: 700 W continuous / 2800 W peak
- Frequency range (-10 dB): 45 Hz – 20 kHz
- Frequency response (±3 dB): 55 Hz – 18 kHz
- Coverage pattern: 90° H x 60° V nominal
- Sensitivity: 100 dB (1 W/1 m)
- Max. SPL: 128 dB continuous / 134 dB peak
- Protection: dual-band limiter
- Active features: 4 DSP presets, FIR, 2x Line/Mic IN with level & switch, switchable Line/Mix OUT
- Connectors: 2x XLR/6.35 Jack Combo, 1x XLR, PowerCon In/Out
- Enclosure: multi-angle, PP composite
- Finish: black textured paint
- Fittings: 2x M8, 2x handle, M20 pole socket
- Grille: black perforated steel with acoustically transparent foam backing
- Dimensions (WxHxD): 420 x 695 x 380 mm
- Weight: 21 kg
- Accessories: rain cover (art. 12640), RM10 ring screw (art. 12516)
- EAN: 4262552320104
