Solton A 218 Sub is a dual 18-inch hybrid subwoofer built as the low-frequency section for bi-amped or tri-amped systems used in touring and installed applications. Two long-excursion neodymium drivers with 4-inch voice coils handle 2000 W continuous and 6000 W peak, reaching a maximum peak SPL of 142 dB at one meter. An 18 mm birch plywood enclosure and a low-distortion port design keep the low end tight and controlled, avoiding the boxy character common in cheaper subwoofer builds.
Low-End Section for Multi-Way Systems
The subwoofer must be electronically crossed over using a Solton DSP 206 N or an equivalent digital controller, which allows precise crossover point placement and driver protection through DSP limiting rather than a passive crossover network. A 35-200 Hz response within 3 dB and an operating range extending down to 30 Hz at -10 dB give a clean handoff to the mid-high section without band overlap or masking. A 4 ohm nominal impedance simplifies amplifier selection when running several cabinets on a single channel.
Built for Life on the Road
Four integrated side handles and the built-in mounting for a 100 mm wheel set speed up loading and unloading on frequent tours, even though the cabinet itself weighs 64 kg. Two M20 mounting sockets let a distance pole with a mid-high cabinet be mounted directly on top, building a complete point-source system without a separate stand. A steel grille backed with acoustically transparent foam protects the drivers from mechanical damage during transport and on stage, and rear-panel NL4 connectors make it fast to link additional cabinets into the system.
KEY FEATURES
- Two long-excursion 18-inch drivers with 4-inch voice coils
- Maximum peak SPL of 142 dB
- Two M20 mounting sockets for a distance pole
- Four integrated handles for easier transport
- Built-in mounting for a 100 mm wheel set
- 18 mm birch plywood enclosure
- Driver protection handled digitally through a DSP controller
TECHNICAL SPECIFICATIONS
- Type: dual 18-inch, hybrid subwoofer
- Frequency range (-10 dB): 30 Hz to 250 Hz
- Frequency response (+/-3 dB): 35 Hz to 200 Hz
- Coverage pattern: omnidirectional
- Power handling: 2000 W continuous, 6000 W peak
- System sensitivity (1W/1m): 105 dB
- Maximum SPL (at 1m): 138 dB continuous, 142 dB peak
- LF driver: 2x 18-inch, neodymium
- Nominal impedance: 4 Ohm
- Crossover: active, handled by DSP
- Connectors: 2x NL4, pins 1+/1-
- Dimensions (WxHxD): 510 x 1100 x 790 mm
- Weight: 64 kg
