SHURE
Shure SE535-CL-EFS
Menge:
This item is available on a custom order basis only
This item is available on a custom order basis only
Please contact us for more details.
Kontaktiere unsOptionen wählen
Menge:
This item is available on a custom order basis only
This item is available on a custom order basis only
Please contact us for more details.
Kontaktiere uns
Menge:
This item is available on a custom order basis only
This item is available on a custom order basis only
Please contact us for more details.
Kontaktiere uns
Shure SE535-CL-EFS – triple balanced-armature in-ear monitors, the flagship of the SE line below the SE846.
The design runs three balanced-armature drivers per side – one dedicated tweeter and two woofers working in parallel – joined by a passive crossover inside the housing. Splitting the band across three independent sections keeps bass from masking the midrange in dense arrangements, and treble stays defined during long monitoring sessions. The CL-EFS version has a clear housing and a detachable Kevlar-reinforced cable, making it a practical tool for both studio and touring use.
Band separation in a dense mix
Two woofers working in parallel take the load off a single low-frequency driver, so bass stays controlled and fast even when a rhythm section and vocal are both present in the monitor mix. The passive crossover limits distortion at the crossover points, which matters when mixing on headphones during tracking sessions, where accurate level judgment across individual tracks is essential. The 18 Hz to 19 kHz range and 119 dB SPL/mW sensitivity make fine detail audible at lower volume levels, without pushing the gain toward distortion.Cable built for touring
The Kevlar-reinforced cable runs the full length of the assembly, cutting the risk of a broken conductor from daily packing and unpacking, and the locking MMCX connector rotates a full 360 degrees to route the cable without twisting loose during stage movement. The high sensitivity reduces the load on the source device, which matters when running from bodypack transmitters with limited output power or straight from an audio interface without a dedicated headphone amp.KEY FEATURES
- Triple balanced-armature drivers per side (tweeter and two woofers) with passive crossover
- Passive noise isolation up to 37 dB
- Kevlar-reinforced detachable cable with locking, 360-degree rotating MMCX connector
- High 119 dB SPL/mW sensitivity for low-signal sources
- Fit kit with soft-flex, foam, and triple-flange sleeves in S, M, L
- Clear housing (CL finish) and carrying case included
TECHNICAL SPECIFICATIONS
- Transducer type: triple balanced-armature drivers
- Frequency range: 18 Hz – 19 kHz
- Sensitivity: 119 dB SPL/mW at 1 kHz
- Impedance: 36 Ω at 1 kHz
- Noise attenuation: up to 37 dB
- Cable length: 162 cm (64 in)
- Output connector: gold-plated 3.5mm, 6.3mm adapter included
- Net weight: approximately 30 g
- Manufacturer warranty: 2 years
