



Samar Audio Design
Samar Audio Design AL95 + AL AcHve Bundle Ribbon Microphone and Preamp Bundle
Optionen wählen
Samar Audio Design AL95 + AL AcHve Bundle is a bundle of the passive Samar AL95 ribbon microphone and the in-line AL Active preamp. The microphone brings a piston ribbon with deep bass, and the module adds 18 dB of clean transformer gain, so the pair works well even with a simple audio interface.
Why these two belong together
The AL95 offers 1.6 mV/Pa sensitivity and a 250 ohm impedance, like most passive ribbons, which means a preamp with plenty of gain in reserve. The AL Active plugs straight into the microphone's XLR, gives 18 dB and a load of about 10 kilohms, at which a ribbon sounds most open. No extra cable and no solid-state device in the gain path.
A piston ribbon is more robust than a regular zig-zag one, so in the studio and at rehearsals it needs no special care, and the AL Active weighs 90 g and does not burden the clip. Everything is built in Salt Lake City.
What you get in practice
A figure-8 microphone for MS and Blumlein, overheads, room, guitar cabinets and vocals, paired with a module that lowers the demands on the rest of the chain. Samar builds both in the USA with a 1-year warranty on the AL95 and the AL Active. The module needs 48 V phantom power.
It is meant for people who start with a single ribbon and want to avoid the usual problem of a passive ribbon at once: a signal too quiet for the simple preamp in an interface. The module needs no setup and has no knobs.
KEY FEATURES
- Bundle: AL95 ribbon microphone and AL Active preamp
- Piston ribbon, figure-8 pattern
- 18 dB of gain from a toroidal transformer
- Module plugs directly into the microphone's XLR
- Injection-moulded carrying case and shock-proof clip
- Made in the USA, 1-year warranty
TECHNICAL SPECIFICATIONS
- AL95: figure 8, 20 Hz - 25 kHz, 1.6 mV/Pa, 250 ohms, 182 g
- AL Active: 18 dB gain, 48 V phantom, 65 ohms, 90 g
- AL95 dimensions: 142 x 25 mm
- AL Active dimensions: 95 x 25 mm


