Austrian Audio MiCreator System Set

Austrian Audio MiCreator System Set — a modular USB-C recording system combining the MiCreator Studio mic/interface with the Satellite companion mic, mounted on the MCMB MiniBar stereo bar, with swappable faceplates and a carrying case.

The MiCreator Studio combines a cardioid condenser microphone and a USB-C audio interface in one unit, recording up to 48 kHz/24-bit with no extra hardware needed. Two hardware gain settings — 0 dB and 20 dB — plus a maximum SPL of 130 dB at low gain let it handle a quiet vocal and a louder guitar combo alike. The System Set adds the Satellite mic built around the same capsule, the MCMB MiniBar stereo bar pre-configured for ORTF placement, the MCC1 and MCC2 cables, swappable black and red faceplates, and the MCSC carrying case.

Stereo recording without a separate multi-channel interface

A common problem for a creator wanting to record an acoustic instrument in stereo: a single USB mic isn't enough, and moving to a full multi-channel interface means extra hardware and a more complex setup. The MiCreator System Set solves this by linking Studio and Satellite through the link port with one cable — the whole rig connects to a computer or mobile device via a single USB-C connection, and the MiniBar holds both mics in a pre-set ORTF geometry, ready for stereo recording without manual angling.

A two-person podcast without an external mixer

Recording a two-person conversation usually means either two separate USB interfaces or a mixer with multiple mic inputs. Linking Studio and Satellite via the link cable gives two independent input channels managed from a single device, and each mic has its own headphone jack, so both speakers can monitor themselves separately during the recording — without extra routing or an external mixing setup.

KEY FEATURES

• MiCreator Studio: cardioid condenser mic + USB-C interface, up to 48 kHz/24-bit
• MiCreator Satellite: second cardioid capsule for stereo or two-person podcast recording
• MCMB MiniBar stereo bar pre-configured for ORTF geometry
• FlexTilt mechanism for adjusting mic head angle
• Two hardware gain settings: 0 dB / 20 dB
• Instrument input (MCC1 cable) and headphone jack with zero-latency monitoring
• Swappable front and back faceplates: black and red
• MCSC carrying case for the full set

TECHNICAL SPECIFICATIONS

• Digital resolution: up to 48 kHz / 24-bit
• Digital connector: USB-C, USB Audio Class 1.0/2.0 compliant
• Polar pattern (Studio and Satellite): cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity (Studio): -35 dBFS/Pa (low gain) / -15 dBFS (high gain)
• Hardware gain: 0 dB (low) / 20 dB (high)
• Equivalent noise level: 22 dB SPL(A) at high gain
• Maximum SPL: 130 dB SPL (low gain)
• Headphone output power: 45 mW (32 Ω load)
• Dynamic range: 89 dB(A)
• Studio dimensions: 155 x 60 x 37 mm, weight 370 g
• Satellite dimensions: 100 x 60 x 28 mm, weight 220 g