Solton
Solton FLC 18
Cantidad:
This item is available on a custom order basis only
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosElegir opciones
Cantidad:
This item is available on a custom order basis only
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotros
Cantidad:
This item is available on a custom order basis only
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotros
Solton FLC 18 – a steel flying frame for suspending the Solton A 18 FL Sub (also sold as the HD 181 Sub) subwoofer together with RB 82 or SL 210 line array modules in a single flown array.
The frame addresses a specific rigging problem on touring and installed systems: linking the low-frequency section with the line array top in one hang, without a separate truss span or extra points on the stage structure. FLC 18 attaches to the factory sockets on the subwoofer enclosure, so the whole array sits under one structural calculation instead of two.
One rigging point instead of two
The frame uses the same M10 sockets already used for ground stacking, so the same enclosure covers both duties without reconfiguration. A rigger no longer has to design a separate hang for the low-end section – sub and line array share one set of chains or steel cables. That cuts build time and simplifies the load documentation, since the crew works with a single load point rather than two independent hangs.Angle control for RB 82 and SL 210 arrays
The frame lets you set the subwoofer's tilt angle relative to the RB 82 or SL 210 modules flown above it, which matters when shaping low-frequency coverage in a cardioid or end-fire arrangement. Quick-release fittings and locking pins speed up load-in and load-out, and the powder-coated steel construction holds its geometry through repeated handling without developing play in the joints.KEY FEATURES
- Flying frame built specifically for the A 18 FL Sub / HD 181 Sub
- Mounts to the subwoofer's factory M10 sockets
- Full compatibility with RB 82 and SL 210 line array modules
- Adjustable tilt angle for flown configurations
- Quick-release fittings and locking pins for fast touring setup
- Shared load point for the sub section and line array modules
TECHNICAL SPECIFICATIONS
- Material: powder-coated steel
- Mounting type: M10 sockets matching the A 18 FL Sub / HD 181 Sub series
- Compatible systems: Solton RB 82, Solton SL 210
- Operating modes: flying (suspended), ground stacking
- Angle adjustment: multi-stage, matched to RB 82 and SL 210 geometry
- Finish: black, corrosion-resistant coating
