RODE
Rode Wireless Go 3 Cobalt
Elegir opciones
Rode Wireless Go 3 Cobalt is a third-generation dual-channel compact wireless microphone system — a microphone built for filmmakers, vloggers, and content creators who need professional-grade recording in any situation without sacrificing ease of use. Cobalt is a limited-edition colour variant of the GO Gen 3, which over its predecessor brings 32-bit float on-board recording, upgraded capsules and preamps shared with the flagship Wireless PRO, extended range up to 260m, and locking lavalier connectors — all in the same compact square form factor.
32-Bit Float and GainAssist — No More Ruined Takes
Each of the two TX transmitters features a built-in 32-bit float recorder with 32GB of storage — over 40 hours of backup recording running in parallel with the signal sent to the camera. The 32-bit float format means both clipped and too-quiet recordings can be rescued in post-production without quality loss. Intelligent GainAssist operates in two modes (Auto and Dynamic) or can be switched off for manual gain control across a 30dB range. The Safety Channel records a second track at -10dB as an additional insurance layer for unexpected volume spikes.
The built-in omnidirectional capsules and preamps are the same units found in the Wireless PRO — 50Hz–20kHz frequency response, 72dB SNR, 123.5dB max SPL. Locking 3.5mm TRS connectors on both transmitters prevent accidental disconnection of a plugged-in lavalier during recording.
Universal Compatibility and Direct Connect for iOS
The RX receiver outputs both digitally via USB-C and analogue via 3.5mm TRRS, making the Wireless GO 3 compatible with DSLR and mirrorless cameras, Android and iOS smartphones, and computers as a USB audio interface. The 3.5mm headphone output on the receiver enables on-location audio monitoring. Direct Connect (iOS only) lets transmitters pair directly to a smartphone via Bluetooth through the RØDE Capture app — no receiver required. The system is fully compatible with all RØDE Series IV devices: RØDECaster Pro II, Duo, Video, Wireless PRO, and Interview PRO.
KEY FEATURES
- Dual-channel system: 2× TX + 1× RX — simultaneous recording of two sources
- Series IV 2.4GHz transmission with 128-bit encryption and near-zero latency codec
- Operating range: up to 260m line-of-sight
- 32-bit float on-board recording: 32GB per transmitter, 40+ hours of backup audio
- Intelligent GainAssist (Auto / Dynamic / Off) + Safety Channel at -10dB
- Built-in omnidirectional capsules — same as Wireless PRO (50Hz–20kHz)
- Locking 3.5mm TRS connectors on transmitters for external lavalier microphones
- Digital USB-C and analogue 3.5mm TRRS outputs on receiver
- 3.5mm headphone output on receiver for in-field audio monitoring
- Direct Connect (iOS): Bluetooth pairing via RØDE Capture without receiver
- Plug-in Power Detect — auto power on/off triggered by camera
- Battery life: up to 7 hours; compatible with optional Charge Case+ (up to 21h total)
- Compatibility: iOS 14+, Android 9+, macOS 11+, Windows 10+
- Compatible with all RØDE Series IV devices
- Colour: Cobalt (limited edition); also available in Black, White, and other colours
- Designed and manufactured in Sydney, Australia
TECHNICAL SPECIFICATIONS
- Transmission: RØDE Series IV 2.4GHz digital, 128-bit encryption
- Operating range: up to 260m line-of-sight
- Frequency response (built-in mic): 50Hz – 20kHz
- Frequency response (receiver): 20Hz – 20kHz
- Polar pattern: Omnidirectional
- Maximum SPL: 123.5 dB
- Signal-to-noise ratio: 72 dB
- On-board recording: 32-bit float / 48kHz, 32GB (40+ hours) per transmitter
- TX input: locking 3.5mm TRS (external lavalier)
- RX outputs: 3.5mm TRRS (camera/smartphone), USB-C, 3.5mm TRS (headphones)
- Battery life: up to 7 hours per charge
- Dimensions (TX and RX): 46.5 × 44 × 20 mm
- Weight: TX 35g, RX 36g
- In the box: 2× TX transmitter, 1× RX receiver, USB-C charging hub (3× output), SC2 cable (3.5mm TRS), SC21 cable (USB-C to Lightning), SC22 cable (USB-C to USB-C), 3× furry windshield, carry pouch
