Samar Audio Design VL373A is the active version of the VL373 stereo ribbon microphone: two ribbon elements in one body, a swivel arrangement with an adjustable 60 to 120 degree angle, and electronics that cut noise by 4-5 dB compared to the passive model. Handcrafted in Salt Lake City.
Stereo ribbon without demands on the preamp
The active version gives a condenser-like output level and a properly matched load on the ribbons, so you do not need an expensive preamp or a short cable to get low noise. It is a microphone for classical, broadcast, film and studio recording, where background silence decides the quality of the stereo image.
The ribbon motors and tuning come from the flagship MF65, as across the whole family, and the microphone is made by hand in Salt Lake City. It has a stainless steel body, a wooden box and a shock-proof clip. High SPL handling, a built-in pop filter and a symmetrical pattern make it equally at home in the studio and in live sound.
A stereo angle that fits the ensemble
The swivel mechanism changes the angle from 60 to 120 degrees: wide for orchestra and choir, narrow for small groups, overheads and soloists. The elements sit close together to limit phase distortion, and Blumlein, MS and XY setups are done with one microphone on one stand. Phantom power is required.
KEY FEATURES
- Active stereo ribbon microphone
- 4-5 dB lower noise than the passive VL373
- Condenser-like output level
- Adjustable stereo angle from 60 to 120 degrees
- Elements placed close together for coherent phase
- Stainless steel body, wooden box and shock-proof clip included
- Made in the USA, 5-year parts and 2-year ribbon replacement warranty
TECHNICAL SPECIFICATIONS
- Type: stereo, active
- Pickup pattern: two figure-8 elements, angle adjustable 60-120 degrees
- Frequency response: 20 Hz - 25 kHz
- Power: phantom
- Ribbon elements: MF65 / VL37 family




