



Samar Audio Design
Samar Audio Design MG20 Cardioid Transformer SDC Matched Pair Matched Pair of Transformer Condenser Microphones
Elegir opciones
Samar Audio Design MG20 Cardioid Transformer SDC Matched Pair is a pair of transformer-coupled small-diaphragm condensers, cardioid, matched by Samar Audio. A JFET circuit with an in-house transformer, close to a classic KM84, and a full, extended low end in two units with close parameters.
A transformer that does not choke the top
Dr. Mark Fouxman designed the transformer for this model: a chambered winding, the same topology as in expensive transformers such as the Neumann BV8, gives very low capacitance and a good high-frequency response. The core is laminated from US-made 80% nickel. The result is a smooth sound without an exaggerated top end.
The capsule is the same as in the MG32 and MG33, and the MG20 differs from them by the transformer and a 200 ohm output impedance. The JFET circuit with an in-house transformer is close to a classic KM84, and the build is handcrafted in Salt Lake City. The response has a full, extended low end, and the noise level is 15 dBA.
A pair for overheads and stereo technique
A matched MG20 pair is the classic kit for drum overheads, piano, choir, orchestra and stereo acoustic guitar in XY, ORTF and AB setups. Similar sensitivity of -41 dB (8.91 mV/Pa) and response across both units avoids a drifting stereo image. Samar offers a service of matching microphones into pairs.
KEY FEATURES
- Pair matched by the manufacturer
- Transformer-coupled condenser microphone, cardioid
- JFET circuit with an in-house transformer, close to a classic KM84
- Chambered-winding transformer with an 80% nickel core
- Low noise and up to 140 dB SPL
- Acoustic lens in the body limits reflections and standing waves
- Made in the USA, 2-year warranty
TECHNICAL SPECIFICATIONS
- Pickup pattern: cardioid
- Capsule pickup area: 0.5 in (about 12.7 mm)
- Sensitivity: -41 dB (8.91 mV/Pa)
- Noise level: 15 dBA
- Max SPL: 140 dB
- Phantom power: 48 V
- Output impedance: 200 ohms
- Dimensions: 25 x 145 mm (1 x 5.7 in)
- Weight: 153 g (5.4 oz)
- Supplied as: 2 microphones, matched by the manufacturer


