Millennia HV-35P

Millennia HV-35P is the HV-35 preamp in a standalone portable case with a line supply included. It runs from mains or from a 12 to 15 V DC battery, so the same HV-3 circuit used in 500 Series racks can go to a location shoot, a rehearsal room or a desktop setup.

A tracking channel with instrument input

The front panel has an instrument input, continuously variable gain, an 80 Hz roll-off filter, 48 V phantom power, a pad and a polarity flip. In ribbon mode the DC-coupled path adds 10 dB, so gain reaches 70 dB for low-output ribbon microphones.

Clean output level

Maximum output is +28 dBu and equivalent input noise is -130 dB, with a response from below 10 Hz to above 200 kHz. That gives a single channel of transparent gain for vocals, acoustic guitar or a DI signal.

KEY FEATURES

• HV-35 circuit in a portable case
• Battery (12 - 15 V DC) or mains operation
• Front-panel instrument input
• DC-coupled ribbon mode with +10 dB boost
• 80 Hz roll-off, +48 V phantom, pad, polarity flip

TECHNICAL SPECIFICATIONS

• Gain: 14.5 dB minimum (1 dB with pad) to 60 dB, 70 dB in ribbon mode
• EIN: -130 dB
• THD+N: below 0.003% typically
• Frequency response: below 10 Hz to above 200 kHz
• Maximum output: +28 dBu
• Dimensions: 5.67" x 1.69" x 8.19" (W x H x D), weight 3 lb
• Power: 12 - 15 V DC, 100 - 240 V line supply included