Millennia AOO-316

Millennia AOO-316 is an eight-channel analog output option for the HV-316 remote-controlled microphone preamp. It is installed at the factory and provides eight balanced analog outputs on a 25-pin sub-D connector, working at the same time as the standard Dante output.

Analog outputs without extra conversion

The card takes a direct balanced feed from the analog gain stage of each HV-316 channel, with no analog-to-digital or digital-to-analog conversion in the path. The output stages are the same HV-3 balanced design used in the HV-3C and HV-3D, so the signal to a console, a recorder or an existing converter rack keeps the character of the preamp.

How many cards do you need

One AOO-316 covers eight channels. For a 16-channel HV-316-16, order two cards. The connector follows the AES59 (Tascam) balanced pinout, which is common on converters and consoles.

KEY FEATURES

• Eight balanced analog outputs from an HV-316
• Works simultaneously with the Dante output
• 25-pin sub-D connector, AES59/Tascam pinout
• No A/D or D/A conversion in the signal path
• Factory-installed option

TECHNICAL SPECIFICATIONS

• Frequency response: below 8 Hz to beyond 200 kHz (+0/-3 dB)
• Noise floor: -130 dBu EIN (60 dB gain, 10 Hz - 30 kHz)
• THD+N: below 0.005%, typically 0.001%
• IMD: below 0.0009%
• Maximum output: +22 dBu; output impedance 24.3 ohm
• Slew rate: above 25 V per microsecond