LEWITT
LEWITT LCT 40 SHx
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosElegir opciones
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosThis item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosLEWITT LCT 40 SHx — a studio microphone shockmount compatible with 3/8" and 5/8" threads, built for the LCT 540 S, LCT 540 Subzero, and LCT 640 TS series.
This accessory is aimed at engineers working with mid-size body microphones from this family, where the housing geometry and mounting points differ from smaller LCT Recording models and call for a purpose-shaped suspension rather than a generic clip. The LCT 40 SHx was engineered specifically around the size and mounting points of the LCT 540 S, LCT 540 Subzero, and LCT 640 TS.
A Fitted Suspension for Non-Standard Microphone Geometry
The problem with universal shockmounts is that not every microphone body fits a standard clip mount — the LCT 540/640 series has different mounting-point spacing and a different body diameter than smaller models. The LCT 40 SHx solves this with a build precisely fitted to these models, giving a secure, stable hold with no play that could let the body shift during a session.
Eliminating Vibration Transmitted Through the Stand
With a microphone mounted directly in a rigid clip, every bump to the stand, footstep on the floor, or vibration from an adjacent room passes straight into the capsule as low-frequency noise that's hard to remove in post. The LCT 40 SHx's flexible suspension mechanically isolates the microphone from the stand body, damping that vibration before it reaches the diaphragm, allowing a clean signal even on a hard floor. Its threaded quick-release closure also lets the microphone go in and out in one motion, and compatibility with both 3/8" and 5/8" threads removes the need for an adapter.
KEY FEATURES
- Shockmount dedicated to the LCT 540 S, LCT 540 Subzero, and LCT 640 TS series
- Build precisely fitted to these models' geometry
- Effective reduction of noise, shock, and stand-transmitted vibration
- Quick-acting screw-thread closure for fast mounting and removal
- Compatible with 3/8" and 5/8" threads
- 2-year manufacturer warranty
TECHNICAL SPECIFICATIONS
- Type: studio microphone shockmount
- Compatibility: LCT 540 S, LCT 540 Subzero, LCT 640 TS
- Mounting threads: 3/8" and 5/8"
- Mounting mechanism: quick-acting screw-thread closure
