KLOTZ KIK6.0PPSW

Klotz KIK6.0PPSW is a 6-metre instrument cable from the KIK series, terminated with two straight 6.35 mm TS jack plugs in black shells with flexible studded rubber sleeves. The KIK cable core — 6.1 mm diameter, 99.95% ETP oxygen-free copper — uses double shielding combining conductive plastic and a copper spiral shield, holding capacitance to 115 pF/m. The solid strain relief element withstands forces exceeding 200 N, effectively eliminating the risk of internal solder joint failure from accidental cable pulls during performance.

Double shielding and 115 pF/m — stable signal at full stage length

At 6 metres and 115 pF/m, total cable capacitance reaches 690 pF. For most humbucker-equipped guitars and active pickup systems this figure produces no audible tone change, making the KIK a reliable working cable without the tonal compromises that cheaper single-shielded cables introduce at this length. The combination of inner conductive plastic and outer copper spiral creates a dual-layer EMI barrier that rejects mains induction and nearby wireless system interference — sources that manifest as audible noise or hum through a guitar amplifier when poorly shielded cables are used on a busy stage. The lead-free PVC jacket and flexible rubber sleeve at the plug — rather than a rigid shrink sleeve — allow free bending at guitar output sockets and amplifier inputs of varying geometry and angle.

200 N strain relief and 6 metres — built for everyday stage use

Six metres provides full freedom of movement on stage with the amplifier positioned at the back, without stretching the cable when approaching the stage edge and without excess cable dragging across the floor. The strain relief rated above 200 N protects internal solder connections against the mechanical stress of accidental cable treading or sudden pulls — failure modes that cause intermittent or permanent signal loss in cables with weaker connector assemblies. The black finish and discreet visual profile keep the cable from being a distraction on stage; the KIK series is also available in five colours for easy identification in multi-instrument setups.

KEY FEATURES

• Double shielding: conductive plastic + copper spiral shield — effective EMI rejection
• 115 pF/m capacitance — reliable performance at 6 m for humbuckers and active systems
• 99.95% ETP oxygen-free copper core — low resistance, high signal purity
• Strain relief rated above 200 N — protects internal solder joints from mechanical stress
• Flexible studded rubber sleeve — free bending at sockets of varying geometry
• Lead-free PVC outer jacket, 6.1 mm diameter — durable and flexible
• Straight-to-straight configuration — two TS jack 6.35 mm plugs with black shells

TECHNICAL SPECIFICATIONS

• Order code: KIK6.0PPSW
• EAN: 4250046803882
• Series: KIK
• Category: professional instrument
• Length: 6 m
• Cable color: black
• Cable type: KIK, diameter 6.1 mm, ETP oxygen-free copper 99.95%
• Shielding: double — conductive plastic + copper spiral shield
• Capacitance: 115 pF/m (35 pF/ft)
• Outer jacket: lead-free PVC
• Connector 1: jack 2p TS 6.35 mm, straight, black shell
• Connector 2: jack 2p TS 6.35 mm, straight, black shell
• Contacts: nickel-plated
• Sleeve: flexible studded rubber, short bending radius
• Strain relief: above 200 N
• Jack manufacturer: KLOTZ